V23814-U1306-M136 Datasheet, PDF (14/29 Pages) Infineon Technologies AG – PAROLI Tx AC, 1.6 Gbit/s

V23814-U1306-M136
V23815-U1306-M136
Technical Data
Recommended Operating Conditions
Parameter
Symbol
Limit Values Unit
min.
max.
Transmitter
Power Supply Voltage
Noise on Power Supply¹⁾
Noise on Power Supply²⁾
Data Input Voltage Range^{3), 4)}
Data Input Differential Voltage^{4), 5)}
Data Input Skew⁶⁾
Data Input Rise/Fall Time⁷⁾
LVCMOS Input High Voltage
LVCMOS Input Low Voltage
LVCMOS Input Rise/Fall Time⁸⁾
Receiver
V_CC
N_PS1
N_PS2
V_DATAI
|V_ID|
t_SPN
t_R, t_F
V_LVCMOSIH
V_LVCMOSIL
t_R, t_F
3.135
500
80
50
2.0
V_EE
3.6
V
50
mV
100
mV
V_CC
mV
1000
mV
0.5 x t_R, t_F ps
300
ps
V_CC
V
0.8
V
20
ns
Power Supply Voltage
Noise on Power Supply¹⁾
Noise on Power Supply²⁾
Differential LVDS
Termination Impedance
V_CC
3.0
N_PS1
N_PS2
R_t
80
3.6
V
50
mV
100
mV
120
W
LVCMOS Input High Voltage
LVCMOS Input Low Voltage
LVCMOS Input Rise/Fall Time⁸⁾
Optical Input Rise/Fall Time⁹⁾
Input Extinction Ratio
V_LVCMOSIH 2.0
V_CC
V
V_LVCMOSIL V_EE
0.8
V
t_R, t_F
20
ns
t_R, t_F
320
ps
ER
6.0
dB
Input Center Wavelength
Voltages refer to V_EE = 0 V.
l_C
830
860
nm
1) _{Noise frequency is 1 kHz to 10 MHz. Voltage is peak-to-peak value.}
2) _{Noise frequency is > 10 MHz. Voltage is peak-to-peak value.}
3) _{This implies that the input stage can be AC coupled.}
4) _{Input level diagram: see Figure 5.}
5) _{|VID| = |(input voltage of non-inverted input minus input voltage of inverted input)|.}
6) _{Skew between positive and negative inputs measured at 50% level.}
7) _{20% - 80% level.}
8) _{Measured between 0.8 V and 2.0 V.}
9) _{20% - 80% level. Non filtered values.}
Data Sheet
14
2002-05-14