PTFB211803EL Datasheet, PDF(14/14 Page) Infineon Technologies AG – Thermally-Enhanced High Power RF LDMOS FETs 180 W, 2110

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

PTFB211803EL Datasheet, PDF (14/14 Pages) Infineon Technologies AG – Thermally-Enhanced High Power RF LDMOS FETs 180 W, 2110 – 2170 MHz

◁

PTFB211803EL V1 / PTFB211803FL V2

Confidential, Limited Internal Distribution

Revision History:

2010-11-10

Previous Version:

2010-08-25, Data Sheet

Page

Subjects (major changes since last revision)

1, 2, 12

Changed eared flange package type

We Listen to Your Comments

Any information within this document that you feel is wrong, unclear or missing at all?

Your feedback will help us to continuously improve the quality of this document.

Please send your proposal (including a reference to this document) to:

highpowerRF@infineon.com

To request other information, contact us at:

+1 877 465 3667 (1-877-GO-LDMOS) USA

or +1 408 776 0600 International

Data Sheet

Edition 2010-11-10

Published by

Infineon Technologies AG

81726 Munich, Germany

Legal Disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics.

With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the

application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind,

including without limitation, warranties of non-infringement of intellectual property rights of any third party.

Information

For further information on technology, delivery terms and conditions and prices, please contact the nearest

Infineon Technologies Office (www.infineon.com/rfpower).

Warnings

Due to technical requirements, components may contain dangerous substances. For information on the types in question,

please contact the nearest Infineon Technologies Office.

Infineon Technologies components may be used in life-support devices or systems only with the express written approval of

Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support

device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended

to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is

reasonable to assume that the health of the user or other persons may be endangered.

Data Sheet

14 of 14

Rev. 05, 2010-11-10