BTM7750GP Datasheet, PDF (14/18 Pages) Infineon Technologies AG – TrilithIC

BTM7750GP
I_SH1 = I_SH2 = I_SL1 = I_SL2 = 0 A; – 40 °C < T_j < 110 °C; 8 V < V_S < 18 V
unless otherwise specified
Pos. Parameter
Symbol Limit Values
Switching times of high-side switch¹⁾
min. typ.
5.4.50 Turn-ON-time to 90% V_SH
5.4.51 Turn-OFF-time to 10% V_SH
5.4.52 Slew rate on 10 to 30% V_SH
5.4.53 Slew rate off 70 to 40% V_SH
Switching times of low-side switch¹⁾
t_ON
–
85
t_OFF
–
80
dV/d_tON
–
–
-dV/d_tOFF –
–
5.4.54 Turn-ON-time to 10% V_DL
5.4.55 Turn-OFF-time to 90% V_DL
t_ON
–
60
t_OFF
–
60
5.4.56 Slew rate on 70 to 50% V_DL
5.4.57 Slew rate off 50 to 70% V_DL
-dV/d_tON –
1
dV/d_tOFF –
1
Control Inputs of high-side switches IH 1, 2
5.4.58 H-input voltage
5.4.59 L-input voltage
5.4.60 Input voltage hysteresis
5.4.61 H-input current
5.4.62 L-input current
5.4.63 Input series resistance
5.4.64 Zener limit voltage
Control Inputs IL1, 2
V_{IH High}
V_{IH Low}
V_{IH HY}
I_{IH High}
I_{IH Low}
R_I
V_{IH Z}
5.4.65 Gate-threshold-voltage
V_{IL th}
1) Not subject to production test; specified by design
–
–
1
–
–
0.3
15
30
5
–
2.7 4
5.4 –
0.9 1.7
max.
180
180
1.2
1.6
150
150
1.5
1.5
2.5
–
–
60
20
5.5
–
2.2
Unit Test Condition
μs R_Load = 12 Ω
μs ^VS ^{= 12 V}
V/μs
V/μs
μs
μs
V/μs
V/μs
R_Load = 10 Ω
V_S = 12 V
V_IL = 0 to 5 V
R_Load = 4.7 Ω
V_S = 12 V
V_IL = 0 to 5 V
V–
V–
V–
μA V_IH = 5 V
μA V_IH = 0.4 V
kΩ –
V I_IH = 1.6 mA
V I_DL = 2 mA
Note: The listed characteristics are ensured over the operating range of the integrated circuit. Typical
characteristics specified mean values expected over the production spread. If not otherwise specified,
typical characteristics apply at T_A = 25 °C and the given supply voltage.
Data Sheet
14
Rev. 1.0, 2008-07-07