TLE42754_14 Datasheet, PDF (11/29 Pages) Infineon Technologies AG – Very low Current Consumption

TLE42754
Block Description and Electrical Characteristics
Table 4 Electrical Characteristics Voltage Regulator
V_I = 13.5 V, -40 °C ≤ T_j ≤ 150 °C, all voltages with respect to ground, positive current flowing into pin (unless
otherwise specified)
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Output Voltage
V_Q
4.9 5.0 5.1 V
1 mA < I_Q < 450 mA
9 V < V_I < 28 V
Output Voltage
V_Q
4.9 5.0 5.1 V
1 mA < I_Q < 400 mA
6 V < V_I < 28 V
Output Voltage
V_Q
4.9 5.0 5.1 V
1 mA < I_Q < 200 mA
6 V < V_I < 40 V
Output Current Limitation
I_Q,max
450 –
1100 mA V_Q = 4.8V
Load Regulation
steady-state
∆V_Q,load -30 -15 –
mV I_Q = 5 mA to 400 mA
V_I = 8 V
Line Regulation
steady-state
∆V_Q,line –
Dropout Voltage¹⁾
V_dr
–
V_dr = V_I - V_Q
Power Supply Ripple Rejection²⁾ PSRR –
5
15 mV
250 500 mV
60 –
dB
V_I = 8 V to 32 V
I_Q = 5 mA
I_Q = 300 mA
f_ripple = 100 Hz
V_ripple = 0.5 Vpp
Temperature Output Voltage Drift dV_Q/dT –
0.5
Overtemperature Shutdown
Threshold
T_j,sd
151 –
–
mV/K –
200 °C
T_j increasing²⁾
Overtemperature Shutdown
Threshold Hysteresis
T_j,sdh
–
20 –
°C
T_j decreasing²⁾
1) measured when the output voltage V_Q has dropped 100mV from the nominal value obtained at V_I = 13.5V
2) not subject to production test, specified by design
P_5.1.1
P_5.1.2
P_5.1.3
P_5.1.4
P_5.1.5
P_5.1.6
P_5.1.7
P_5.1.8
P_5.1.9
P_5.1.10
P_5.1.11
Data Sheet
11
Rev. 1.2, 2014-07-03