TLE4990 Datasheet, PDF (10/24 Pages) Infineon Technologies AG – Programmable Linear Output Hall Sensor

TLE4990
Programmable Linear Hall Sensor
Operating Range
4
Operating Range
The following operating conditions must not be exceeded in order to ensure
correct operation of the TLE4990. All parameters specified in the following
sections refer to these operating conditions, unless otherwise noticed.
Table 3
Operating Condition Parameters¹⁾
Parameter
Symbol Limit Values Unit Notes
min. max.
Supply voltage
V_DD
4.5 5.5
V
Load resistance
R_L
4.7 -
7
kΩ
for OBD parameters ²⁾
Load capacitance
C_L
Ambient temperature ⁴⁾ T_A
0
50
nF
3)
-40 150
°C
1) _{Keeping signal levels within the limits specified in this table, ensures operation without overload conditions.}
2) _{OBD= On Board Diagnostics (see Table 12).}
3) _{A minimum capacitance of 1 nF is recommended in order to improve the EMC behaviour.}
4) _{RTHja ≤ 150 K/W}
Data Sheet
10
V 2.0, 2004-05