|
TDA6170 Datasheet, PDF (10/27 Pages) Infineon Technologies AG – Components for Entertainment Electronics, Satellite Sound IF | |||
|
◁ |
Data Sheet
TDA6170X
7.3.1 Logic Allocation
Byte
Address Byte
Data
0
1
0
0
0
0 MA R/W
Progr. Divider Byte 1 0
Progr. Divider Byte 2 0
0 N11 N10 N9 N8 N7 N6
0 N5 N4 N3 N2 N1 N0
Control Byte 1
Control Byte 2
1
5I Z2 Z1 Z0 X
X
X
1 VL2 VL1 VL0 VR2 VR1 VR0 X
Control Byte 3
Address Byte 11
Address Byte 22
1 PVL2 PVL1 PVL0 PVR2 PVR1 PVR0 X
0
1
0
0
0
1
0
0
0
1
0
0
0
1
1
0
1. Chip address (CAS) Pin 5 grounded
2. Chip address (CAS) Pin 5 open
7.3.2 IF-Muting
Remarks
A
A
A
A
A
A
A =H44
A =H46
Control Bits
Z2 Z1 Z0
0
0
0
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
IF-Source
IF1 IF2 IF3
Function
on on off expanders are working, audio = stereo
off on off expanders are working, audio = mono
on off off expanders are working, audio = mono
off off on de-emphasis = 50µ; audio = mono
off off on de-emphasis = 75µ; audio = mono
off off on de-emphasis = J17; audio = mono
off off off External audio
off off off Mute
7.4 Converter Mixer
In the converter mixer the sound subcarriers (frequency band approx. 5 to 9.9 MHz) contained in the base-
band of the received composite satellite signal are converted to an output frequency of 10.52 MHz and 10.7
MHz for example. The converter consists of a high-pass input ï¬lter followed by a double balanced mixer and a
low impedance output.
The signal of the on chip voltage controlled oscillator (VCO) is applied to the PLL input.
7.5 IF Limiter with Demodulator
The two limiter ampliï¬ers are implemented as balanced ï¬ve stage, capacitively coupled differential ampliï¬ers.
The three inputs are designed as high-pass inputs. The load resistors for the IF ï¬lters are connected to
ground.
The output signals of the limiter ampliï¬ers are fed directly to the internal PLL FM demodulators.
The demodulated AF signals are fed to the input of a pre volume control part in front of the expander the de-
emphasis networks and audio switches.
Semiconductor Group
6
21.7.99
|
▷ |