|
TLE8201R Datasheet, PDF (1/45 Pages) Infineon Technologies AG – Door Module Power IC | |||
|
Door Module Power IC
TLE 8201R
Data Sheet Rev. 2.0
Features
⢠Full bridge (150mâ¦) for main doorlock motor
⢠Two half-bridges (400mâ¦) for deadbolt and mirror
position motor or mirror fold motor
⢠Two half-bridges (800mâ¦) for mirror position
⢠High-side switch (100mâ¦) for mirror defrost
⢠Four high-side switches (500mâ¦) for 5W and 10W
lamps
⢠Current sense analog output with multiplex
⢠All outputs with short circuit protection and diagnosis
⢠Over-temperature protection with warning
⢠Open load diagnosis for all outputs
⢠Charge pump-Output for n-channel MOS-FET reverse-polarity protection
⢠Very low current consumption in sleep mode
⢠Standard 16-bit SPI for control and diagnosis
⢠Over-and Undervoltage Lockout
⢠Power-SO package with full-size heatslug for excellent low thermal resistance
Type
TLE 8201R
Ordering Code
-
Package/Shipment
PG-DSO-36-27
Functional Description
The TLE 8201R is an Application Specific Standard Product for automotive door-module
applications. It includes all the power stages necessary to drive the loads in a typical front
door application, i.e. central lock, deadlock or mirror fold, mirror position, mirror defrost
and 5W or 10W lamps, e.g for turn signal, courtesy/warning or control panel illumination.
It is designed as a monolithic circuit in Infineons mixed technology SPT which combines
bipolar and CMOS control circuitry with DMOS power devices.
Short circuit and over-temperature protection and a detailed diagnosis are in line with the
safety requirements of automotive applications. The current sense output allows to
improve the total system performance. The standard SPI interface saves microcontroller
I/O lines while still giving flexible control of the power stages and a detailed diagnosis.
Data Sheet Rev. 2.0
1
2006-06-07
|
▷ |