English
Language : 

TLE6282G_08 Datasheet, PDF (1/16 Pages) Infineon Technologies AG – Dual Half Bridge Driver IC Compatible to very low ohmic normal
Data Sheet TLE6282G
Dual Half Bridge Driver IC
Features
• Compatible to very low ohmic normal Product Summary
level input N-Channel MOSFETs
• Separate input for each MOSFET
• PWM frequency up to 50 kHz
• Operates down to 7.5V
supply voltage
Turn on current
Turn off current
Supply voltage range
Gate Voltage
IGxx(on)
IGxx(off)
VVs
VGS
850 mA
580 mA
7.5 … 60
V
10
V
• Low EMC sensitivity and emission Temperature range
TJ
-40...+150 °C
• Adjustable dead time with shoot
through protection
• Deactivation of dead time and shoot through protection possible
• Short circuit protection for each Mosfet can be disabled and adjusted
• Driver undervoltage shut down
• Reverse polarity protection for the driver IC
• Disable function
• Input with TTL characteristics
• 1 bit diagnosis
• Integrated bootstrap diodes
• Green Product (RoHS compliant)
• AEC Qualified
PG-DSO 20
Marking
Application
TLE6282G
• Dedicated for DC-brush high current motor bridges in PWM control mode and adapted for use in injector and
valve applications for 12, 24 and 42V powernet applications. Useable as four fold lowside driver for unipolar 4
phase motor drives.
• The two half bridges can operate independently. The two half bridges can even operate at different supply
voltages.
General Description
Dual half bridge driver IC for MOSFET power stages with multiple protection functions.
Block Diagram
VS
GND
Linear
Regulator
INH
IH1
IL1
IH2
IL2
DT/DIS
HS1
Input control
LS1
HS2
Dead time
LS2
ERR
Undervoltage
Short circuit Detect.
Charge Pump
Level
OR
Undervoltage HSx
Undervoltage LSx
Short Circuit Detection
Shift
Floating HS Driver 1
+
VGS limitation HS1
+
Short circuit
detect.
SCD
+
Undervoltage
Floating HS Driver 2
+
VGS limitation HS2
+
Short circuit
detect.
SCD
+
Undervoltage
Floating LS Driver 1
+
VGS limitation LS1
+
Short circuit
detect.
SCD
+
Undervoltage
Floating LS Driver 2
+
VGS limitation LS2
+
Short circuit
detect.
SCD
+
Undervoltage
BH1
BH2
DH1
GH1
SH1
DH2
GH2
SH2
DL1
GL1
DL2
GL2
Data Sheet
1
Rev 2.4 2008-03-18