English
Language : 

TLE6282G Datasheet, PDF (1/14 Pages) Infineon Technologies AG – Dual Half Bridge Driver IC
Dual Half Bridge Driver IC
Data Sheet TLE6282G
Features
Product Summary
• Compatible to very low ohmic normal
level input N-Channel MOSFETs
• Separate input for each MOSFET
• PWM frequency up to 50 kHz
• Operates down to 7.5V
supply voltage
Turn on current
Turn off current
Supply voltage range
Gate Voltage
Temperature range
IGxx(on)
IGxx(off)
VVs
VGS
TJ
850 mA
580 mA
7.5 … 60
V
10
V
-40...+150 °C
• Low EMC sensitivity and emission
• Adjustable dead time with shoot through protection
• Deactivation of dead time and shoot through protection possible
• Short circuit protection for each Mosfet
• Driver undervoltage shut down
• Reverse polarity protection for the driver IC
• Disable function
• Input with TTL characteristics
• 1 bit diagnosis
• Integrated bootstrap diodes
Application
P-DSO 20
• Dedicated for DC-brush high current motor bridges in PWM control mode and adapted for use in injector and
valve applications for 12, 24 and 42V powernet applications. Useable as four fold lowside driver for unipolar 4
phase motor drives.
• The two half bridges can operate independently. The two half bridges can even operate at different supply
voltages.
General Description
Dual half bridge driver IC for MOSFET power stages with multiple protection functions.
Block Diagram
VS
GND
Linear
Regulator
INH
IH1
IL1
IH2
IL2
DT/DIS
HS1
Input control
LS1
HS2
Dead time
LS2
ERR
Undervoltage
Short circuit Detect.
Charge Pump
Level
Undervoltage HSx
OR Undervoltage LSx
Short Circuit Detection
Shift
Floating HS Driver 1
+
VGS limitation HS1
+
Short circuit
detect.
SCD
+
Undervoltage
Floating HS Driver 2
+
VGS limitation HS2
+
Short circuit
detect.
SCD
+
Undervoltage
Floating LS Driver 1
+
VGS limitation LS1
+
Short circuit
detect.
SCD
+
Undervoltage
Floating LS Driver 2
+
VGS limitation LS2
+
Short circuit
detect.
SCD
+
Undervoltage
BH1
BH2
DH1
GH1
SH1
DH2
GH2
SH2
DL1
GL1
DL2
GL2
1
Rev 2.2 2006-03-07