TLE6255G Datasheet, PDF (1/23 Pages) Infineon Technologies AG – Single Wire CAN-Transceiver

Single Wire CAN-Transceiver
Final Data Sheet
TLE 6255 G
1
Features
• Single wire transceiver for up to 33 kBit/s bus speed
• Compatibel to GM LAN Standard GMW 3089 - V1.26
• Excellent EMC performance
• High speed mode for up to 100 kBit/s bus speed
• Ambient operation range – 40 °C to 125 °C
• Supply voltage operation range 5.5 V to 28 V
• Typ. 30 µA total current consumption in sleep mode
• 4 kV ESD protection
• Short circuit and overtemperature protected
• Input bilevel feature for wake-up detection
• Output bilevel feature for wake up call
• Loss of Ground protection
• Bus dominant timeout feature
• Programmable slewrate
P-DSO-14-8; -9
Type
TLE 6255 G
Ordering Code
Q67006-A9352
Package
P-DSO-14-9 (SMD)
2
Description
The TLE 6255 G is a special featured low speed transceiver for use in single wire
applications.
The device is primarily designed for use in single wire CAN systems operating with
various CSMA/CR (carrier sense multiple access/collision resolution) protocols such as
the BOSCH Controller Area Network (CAN).
The normal communication bitrate in CAN-systems is up to 33 kBit/s. For software or
diagnostic data download a high speed mode is offered that allows transmission rates
up to 100 kBit/s.
With many integrated features such as slewrate controlled output, loss of ground circuit,
bi-level wake-up and sleep mode for low power consumption the TLE 6255 G is
optimized for use in automotive applications.
The device is based on Smart Power Technology SPT^® which allows bipolar and CMOS
control circuitry to be integrated with DMOS power devices on the same monolithic
circuitry.
Additional features like short circuit and overtemperature protection, over- and
undervoltage lockout are integrated. To enhance the reliability and robustness of the
TLE 6255 G the enhanced power SO-14 package is used in order to provide high
thermal capacity and low thermal resistance.
Data Sheet Rev. 2.5
1
2003-11-27