IL2904_11 Datasheet, PDF (1/6 Pages) IK Semicon Co., Ltd – Low Power Dual Operational Amplifier

TECHNICAL DATA
L ow Power Dual Oper ational Amplifier
IL2904
The IL2904 contains two independent high gain operational amplifiers
with internal frequency compensation. The two op-amps operate over a
wide voltage range from a single power supply. Also use a split power
supply. The device has low power supply current drain, regardless of the
power supply voltage. The low power drain also makes the IL2904 a good
choice for battery operation.
When your project calls for a traditional op-amp function, now you can
streamline your design with a simple single power supply. Use ordinary
+ 5VDC common to practically any digital system or personal computer
application, without requiring an extra 15V power supply just to have the
interface electronics you need.
The IL2904 is a versatile, rugged workhorse with a thousand-and-one
uses, from amplifying signals from a variety of transducers to dc gain
blocks, or any op-amp function. The attached pages offer some recipes that
will have your project cooking in no time.
• Internally frequency compensated for unity gain
• Large DC voltage gain: 100dB
• Wide power supply range:
3V ~ 32V (or ±1.5V ~ ±16V)
• Input common-mode voltage range includes ground
• Large output voltage swing: 0V DC to V_CC-1.5V DC
• Power drain suitable for battery operation
• Low input offset voltage and offset current
• Differential input voltage range equal to the power supply voltage
• Possible to exchange the position of Pin9 for Pin1 because of Pin
Connection being symmetric(IL2904S only)
ORDERI NG I NFORM ATI ON
IL2904N Plastic
IL2904D SOIC
IL2904S SIP-8
T_A = -40° to 85° C for all packages.
L OGI C DI AGRAM
PI N ASSI GNM ENT
PIN 4 = GND
PIN 8= V_CC
2011, January, Rev. 01