8302I-01 Datasheet, PDF (8/8 Pages) Integrated Device Technology – Low Skew, 1-to-2 LVCMOS / LVTTL Fanout Buffer W/ Complementary Output

Ordering Information
Orderable Part Number
8302AMI-01LF
8302AMI-01LF
Marking
302AI01L
302AI01L
8302I-01 Datasheet
Package
3.8 x 4.8 x 1.47 mm 8-SOIC
3.8 x 4.8 x 1.47 mm 8-SOIC
Carrier Type
Tube
Tape and Reel
Temperature
-40° to +85°C
-40° to +85°C
Revision History
Revision Date
May 4, 2017
March 9, 2016
July 29, 2010
Description of Change
▪ Corrected and updated the Ordering Information Table.
▪ Updated package information.
▪ Updated datasheet header/footer.
▪ Features section - removed reference to leaded package
▪ Ordering Information table - removed quantity from tape and reel. Deleted LF note below table.
▪ Added Contact Page
▪ Updated datasheet header/footer with IDT logo from ICS logo.
▪ Ordering Information table - removed ICS prefix from Part/Order Number column.
▪ Added Contact Page.
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
www.IDT.com
Sales
1-800-345-7015 or 408-284-8200
Fax: [phone]
www.IDT.com/go/sales
Tech Support
www.IDT.com/go/support
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time,
without notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same
way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability
of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not
convey any license under intellectual property rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be rea-
sonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property
of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. Integrated Device Technology, Inc.. All rights reserved.
©2017 Integrated Device Technology, Inc.
8
May 4, 2017