IDT70V9199L_10 Datasheet, PDF (5/17 Pages) Integrated Device Technology – HIGH-SPEED 3.3V 128K x9/x8 SYNCHRONOUS PIPELINED DUAL-PORT STATIC RAM

IDT70V9199/099L
High-Speed 3.3V 128K x9/x8 Dual-Port Synchronous Pipelined Static RAM
Industrial and Commercial Temperature Ranges
Recommended Operating
Temperature and Supply Voltage⁽¹⁾
Grade
Ambient
Temperature⁽²⁾
GND
VDD
Commercial
0^OC to +70^OC
0V
3.3V + 0.3V
Industrial
-40^OC to +85^OC
0V
3.3V + 0.3V
NOTES:
4859 tbl 04
1. This is the parameter TA. This is the "instant on" case temperature.
Recommended DC Operating
Conditions
Symbol
Parameter
Min. Typ.
Max.
Unit
VDD Supply Voltage
3.0 3.3
3.6
V
VSS Ground
0
0
0
V
VIH Input High Voltage
VIL Input Low Voltage
2.0
____
VDD+0.3V⁽²⁾
V
-0.3⁽¹⁾
____
0.8
V
NOTES:
1. VIL > -1.5V for pulse width less than 10 ns.
2. VTERM must not exceed VDD +0.3V.
4859 tbl 05
Absolute Maximum Ratings⁽¹⁾
Symbol
Rating
Commercial
Unit
& Industrial
VTERM⁽²⁾
Terminal Voltage
with Respect to
GND
-0.5 to +4.6
V
TBIAS⁽³⁾
Temperature
Under Bias
-55 to +125
o_C
TSTG
Storage
Temperature
-65 to +150
o_C
TJN
Junction Temperature
+150
o_C
IOUT
DC Output Current
50
mA
NOTES:
4859 tbl 06
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may
cause permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated
in the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.
2. VTERM must not exceed VDD +0.3V for more than 25% of the cycle time or 10ns
maximum, and is limited to < 20mA for the period of VTERM > VDD + 0.3V.
3. Ambient Temperature Under DC Bias. No AC Conditions. Chip deselect.
Capacitance⁽¹⁾
(TA = +25°C, f = 1.0MHZ)
Symbol
Parameter
Conditions⁽²⁾
Max. Unit
CIN Input Capacitance
VIN = 3dV
9 pF
COUT⁽³⁾ Output Capacitance
VOUT = 3dV
10 pF
NOTES:
4859 tbl 07
1. These parameters are determined by device characterization, but are not
production tested.
2. 3dV references the interpolated capacitance when the input and output switch
from 0V to 3V or from 3V to 0V.
3. COUT also references CI/O.
DC Electrical Characteristics Over the Operating
Temperature and Supply Voltage Range (VDD = 3.3V ± 0.3V)
Symbol
Parameter
|ILI| Input Leakage Current⁽¹⁾
|ILO| Output Leakage Current
VOL Output Low Voltage
VOH Output High Voltage
Test Conditions
VDD = 3.6V, VIN = 0V to VDD
CE = VIH or CE1 = VIL, VOUT = 0V to VDD
IOL = +4mA
IOH = -4mA
NOTE:
1. At VDD < 2.0V input leakages are undefined.
70V9199/099L
Min.
Max. Unit
___
5
µA
___
5
µA
___
0.4
V
2.4
___
V
4859 tbl 08
6.452