English
Language : 

9DBV0541 Datasheet, PDF (5/16 Pages) Integrated Circuit Systems – HCSL compatible differential input
9DBV0541 DATASHEET
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the 9DBV0541. These ratings, which are standard
values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other
conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
PARAMETER
SYMBOL
CONDITIONS
Supply Voltage
VDDx
Applies to all VDD's
Input Voltage
VIN
Input High Voltage, SMBus VIHSMB
Storage Temperature
Ts
SMBus clock and data pins
Junction Temperature
Tj
Input ESD protection ESD prot
Human Body Model
1Guaranteed by design and characterization, not 100% tested in production.
2 Operation under these conditions is neither implied nor guaranteed.
3 Not to exceed 2.5V.
MIN
-0.5
-0.5
-65
2000
TYP
MAX
2.5
VDD+0.5
3.6
150
125
UNITS NOTES
V
1,2
V
1,3
V
1
°C
1
°C
1
V
1
Electrical Characteristics–Clock Input Parameters
TA = TCOM or TIND; Supply Voltages per normal operation conditions, See Test Loads for Loading Conditions
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
Input High Voltage - DIF_IN VIHDIF
Input Low Voltage - DIF_IN
Input Common Mode
Voltage - DIF_IN
VILDIF
VCOM
Differential inputs
(single-ended measurement)
Differential inputs
(single-ended measurement)
Common Mode Input Voltage
300
750
VSS - 300
0
200
Input Amplitude - DIF_IN
Input Slew Rate - DIF_IN
VSWING
dv/dt
Peak to Peak value (VIHDIF - VILDIF)
Measured differentially
300
0.35
Input Leakage Current
IIN
VIN = VDD , VIN = GND
-5
Input Duty Cycle
dtin
Measurement from differential wavefrom
45
Input Jitter - Cycle to Cycle JDIFIn
Differential Measurement
0
1 Guaranteed by design and characterization, not 100% tested in production.
2 Slew rate measured through +/-75mV window centered around differential zero
MAX
1150
UNITS NOTES
mV
1
300
mV
1
725
mV
1
1450
mV
1
8
V/ns 1,2
5
uA
55
%
1
150
ps
1
REVISION B 08/28/14
5
5 O/P 1.8V PCIE GEN1-2-3 FAN-OUT BUFFER W/ZO=100OHMS