F1162NBGI Datasheet, PDF (4/26 Pages) Integrated Device Technology – RF to IF Dual Downconverting Mixer

DATASHEET
RF to IF Dual Downconverting Mixer
IDTF1162 SPECIFICATION (CONTINUED)
2300 - 2700 MHz F1162NBGI
Parameter
Gain LC Mode
NF STD Mode
NF LC Mode
NF w/Blocker
Output IP3 – STD mode
Output IP3 – LC mode
Output IP3 – High Side
Injection
2RF – 2LO rejection
1 dB Compression –
STD Mode
1 dB Compression – LC
Mode
Gain Comp. w/blocker
Channel Isolation
LO to IF leakage
RF to IF leakage
LO to RF leakage
Comment
Conversion Gain
• FRF = 2700 MHz
• LCMODE = GND
• EVkit BOM = LC Mode
• FIF = 200 MHz (High Side Inj.)
Noise Figure
• RF trace de-embedded
• FIF = 200 MHz
Noise Figure
• RF trace de-embedded
• LCMODE = GND, EVKit BOM = LC
• FIF = 200 MHz
+100 MHz offset blocker
PBLOCKER = +10 dBm
FIF = 250 MHz
PIN = -10 dBm per tone
800 KHz Tone Separation
PIN = -10 dBm per tone
FIF = 200 MHz (Low Side Inj.)
FRF = 2600 MHz
800 KHz Tone Separation
LCMODE = GND
EVKit BOM = LC Mode
PIN = -10 dBm per tone
800 KHz Tone Separation
FIF = 154 MHz (High Side Inj.)
FRF = 2600 MHz
Modified LC mode BOM (p. 26)
PIN = -10 dBm
Frequency = FRF - ½ FIF
Input referred
400 MHz IF
LCMODE = GND
EVKit BOM = LC Mode
FIF = 200 MHz (Low Side Inj.)
Blocker unmodulated tone
PIN = +8 dBm, +100 MHz offset
Signal Pin Tone = -20 dBm
Measure ∆G of signal
FIF = 250 MHz
IF_B Pout vs. IF_A w/ RF_A input
LO Frequency = 2200 MHz
Pin = -10 dBm
• LO Frequency = 2345 MHz
• Low Current Mode
Symbol min
G_LC
6.8
NF_STD
NF_LC
NF_BLK
IP3_O1
38²
IP3_O3
33.5
IP3_O2
2x2
P1dB_I1
11
P1dB_I2
8
∆G_AC
ISO_C
ISO_LI
ISO_RI
ISO_LR
1 – Items in min/max columns in bold italics are Guaranteed by Test
2 – All other Items in min/max columns are Guaranteed by Design Characterization
typ
7.9
9.9
9.7
23.5
43
37.7
43
-68
11.9
10.2
0.15
63
-32
-57
-41
max units
9.0
dB
dB
dB
dB
dBm
dBm
dBm
dBc
dBm
dBm
dB
dB
-23
dBm
-43
dBm
dBm
IDT Zero-Distortion^TM Mixer
4
Rev1, July 2012