74FCT164245TPVG Datasheet, PDF (4/8 Pages) Integrated Device Technology – FAST CMOS 16-BIT BIDIRECTIONAL 3.3V TO 5V TRANSLATOR

IDT74FCT164245T
FAST CMOS 16-BIT BIDIRECTIONAL 3.3V TO 5V TRANSLATOR
INDUSTRIAL TEMPERATURE RANGE
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE (B PORT, 5V)
Following Conditions Apply Unless Otherwise Specified:
VCC1 = 5V ±10%, VCC2 = 2.7V to 3.6V, Industrial: TA = –40°C to +85°C
Symbol
Parameter
Test Conditions⁽¹⁾
Min.
Typ.⁽²⁾
Max.
Unit
VIH
Input HIGH Level (Input and I/O pins) Guaranteed Logic HIGH Level
2
—
5.5
V
VIL
Input LOW Level (Input and I/O pins) Guaranteed Logic LOW Level
–0.5
—
0.8
V
IIH
Input HIGH Current (Input pins)
VCC1 = Max.
VI = VCC1
—
—
±5
Input HIGH Current (I/O pins)
VCC2 = Max.
—
—
±15
µA
IIL
Input LOW Current (Input pins)
VI = GND
—
—
±5
Input LOW Current (I/O pins)
VIK
Clamp Diode Voltage
VOH
Output HIGH Voltage
VOL
Output LOW Voltage
IOFF
Input/Output Power Off Leakage
IOS
Short Circuit Current⁽⁴⁾
IO
Output Drive Current
VH
Input Hysteresis
ICC2
Quiescent Power Supply Current
ICC2H
ICC2Z
VCC1 = Min., IIN = –18mA
VCC1 = Min.
IOH = –3mA
VCC2 = Min.
IOH = –15mA
VIN = VIH or VIL
IOH = –32mA⁽⁵⁾
VCC1 = Min.
IOL = 64mA
VCC2 = Min.
VIN = VIH or VIL
VCC1 = 0V, VCC2 = 0V, VIN or VO ≤ 4.5V
VCC1 = Max., VCC2 = Max., VO = GND⁽³⁾
VCC1 = Max., VCC2 = Max., VO = 2.5V⁽³⁾
—
VCC1 = Max.
VCC2 = Max.
VIN = GND or VCC2
—
—
±15
—
–0.7
–1.2
V
2.5
3.5
—
V
2.4
3.5
—
2
3
—
—
0.2
0.55
V
—
—
±100
µA
–80
–140
–225
mA
–50
–75
–180
mA
—
150
—
mV
—
0.08
1.5
mA
NOTES:
1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC1 = 5V, VCC2 = 3.3V, +25°C ambient.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. This parameter is guaranteed but not tested.
5. Duration of the condition cannot exceed one second.
4