ZSSC3036 Datasheet, PDF (36/48 Pages) List of Unclassifed Manufacturers – Low-Power, High-Resolution 16-Bit Sensor Signal Conditioner

ZSSC3036 Datasheet
MTP
Address
Word / Bit
Range
Default
Setting
Description
0DHEX
15:0
0000HEX
(8000HEX)
Gain_T[15:0]
0EHEX
15:0
0000HEX
SOT_T[15:0]
0FHEX
15:0
0000HEX
T_SETL
Measurement Configuration Register (BM_config)
1:0
00BIN
Gain_stage1
4:2
10HEX
000BIN
Gain_stage2
5
0BIN
Gain_polarity
7:6
00BIN
Msb
(11BIN)
Notes / Explanations
Bits [15:0] of the absolute value of the temperature
gain coefficient (default for prototypes: 0000HEX;
default for volume production: 8000HEX ); the
respective MSBs, Gain_T[16] and sign,
Gain_T_sign, are under bits[1:0] in 04HEX)
2^nd order term applied to the temperature reading –
the respective MSBs, SOT_T[16] and sign,
SOT_T_sign, are under (bits[3:2] in 04HEX)
Stores raw temperature reading at the temperature
at which low calibration points were taken
Gain setting for the 1^st PREÀMP stage with
Gain_stage1:
• 00  12
• 01  20
• 10  30
• 11  40
Gain setting for the 2^nd PREAMP stage with
Gain_stage2:
• 000  1.1
• 001  1.2
• 010  1.3
• 011  1.4
• 100  1.5
• 101  1.6
• 110  1.7
• 111  1.8
Set up the polarity of the sensor bridge’s gain
(inverting of the chopper) with
• 0  positive (no polarity change)
• 1  negative (180° polarity change)
Absolute number of bits for the MSB conversion in
the ADC with Msb:
• 00  10-bit
• 01  12-bit
• 10  14-bit
• 11  16-bit
© 2016 Integrated Device Technology, Inc.
36
April 20, 2016