74FCT163373PV Datasheet, PDF (3/7 Pages) Integrated Device Technology – 3.3V CMOS 16-BIT TRANSPARENT LATCH

IDT74FCT163373A/C
3.3V CMOS 16-BIT TRANSPARENT LATCH
INDUSTRIAL TEMPERATURE RANGE
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Industrial: TA = –40°C to +85°C, VCC = 2.7V to 3.6V
Symbol
VIH
VIL
IIH
IIL
IOZH
IOZL
VIK
IODH
IODL
VOH
VOL
IOS
VH
ICCL
ICCH
ICCZ
Parameter
Test Conditions⁽¹⁾
Input HIGH Level (Input pins)
Guaranteed Logic HIGH Level
Input HIGH Level (I/O pins)
Input LOW Level (Input and I/O pins) Guaranteed Logic LOW Level
Input HIGH Current (Input pins) VCC = Max.
VI = 5.5V
Input HIGH Current (I/O pins)
VI = VCC
Input LOW Current (Input pins)
VI = GND
Input LOW Current (I/O pins)
VI = GND
High Impedance Output Current VCC = Max.
VO = VCC
(3-State Output pins)
VO = GND
Clamp Diode Voltage
VCC = Min., IIN = –18mA
Output HIGH Current
VCC = 3.3V, VIN = VIH or VIL, VO = 1.5V⁽³⁾
Output LOW Current
Output HIGH Voltage
Output LOW Voltage
VCC = 3.3V, VIN = VIH or VIL, VO = 1.5V⁽³⁾
VCC = Min.
IOH = –0.1mA
VIN = VIH or VIL
IOH = –3mA
VCC = 3V
IOH = –8mA
VIN = VIH or VIL
VCC = Min.
IOL = 0.1mA
VIN = VIH or VIL
IOL = 16mA
IOL = 24mA
VCC = 3V
IOL = 24mA
VIN = VIH or VIL
Short Circuit Current⁽⁴⁾
VCC = Max., VO = GND⁽³⁾
Input Hysteresis
—
Quiescent Power Supply Current VCC = Max.
VIN = GND or VCC
Min.
Typ.⁽²⁾
Max.
Unit
2
—
5.5
V
2
—
VCC+0.5
–0.5
—
0.8
V
—
—
±1
—
—
±1
µA
—
—
±1
—
—
±1
—
—
±1
µA
—
—
±1
—
–0.7
–1.2
V
–36
–60
–110
mA
50
90
VCC-0.2
—
2.4
3
2.4⁽⁵⁾
3
200
mA
—
—
V
—
—
—
0.2
—
0.2
0.4
—
0.3
0.55
V
—
0.3
0.5
–60
–135
–240
mA
—
150
—
mV
—
0.1
10
µA
NOTES:
1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 3.3V, +25°C ambient.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. This parameter is guaranteed but not tested.
5. VOH = VCC–0.6V at rated current.
3