English
Language : 

74FCT162244T_09 Datasheet, PDF (3/7 Pages) Integrated Device Technology – FAST CMOS 16-BIT BUFFER/LINE DRIVER Reduced system switching noise
IDT54/74FCT162244T/AT/CT/ET
FAST CMOS 16-BIT BUFFER/LINE DRIVER
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Industrial: TA = –40°C to +85°C, VCC = 5.0V ±10%; Military: TA = –55°C to +125°C, VCC = 5.0V ±10%
Symbol
Parameter
Test Conditions(1)
Min. Typ.(2)
Max.
Unit
VIH
Input HIGH Level
Guaranteed Logic HIGH Level
2
—
—
V
VIL
Input LOW Level
Guaranteed Logic LOW Level
IIH
Input HIGH Current (Input pins)(5) VCC = Max.
VI = VCC
Input HIGH Current (I/O pins)(5)
IIL
Input LOW Current (Input pins)(5)
VI = GND
Input LOW Current (I/O pins)(5)
—
—
0.8
V
—
—
±1
µA
—
—
±1
—
—
±1
µA
—
—
±1
IOZH
High Impedance Output Current VCC = Max.
IOZL
(3-State Output pins)(5)
VO = 2.7V
VO = 0.5V
—
—
±1
µA
—
—
±1
VIK
Clamp Diode Voltage
IOS
Short Circuit Current
VCC = Min., IIN = –18mA
VCC = Max., VO = GND(3)
—
–0.7
–1.2
V
–80
–140
–250
mA
VH
Input Hysteresis
—
ICCL
Quiescent Power Supply Current VCC = Max.
ICCH
VIN = GND or VCC
ICCZ
—
100
—
mV
—
5
500
µA
OUTPUT DRIVE CHARACTERISTICS
Symbol
Parameter
Test Conditions(1)
Min.
Typ.(2)
IODL
Output LOW Current
IODH
Output HIGH Current
VCC = 5V, VIN = VIH or VIL, VO = 1.5V(3)
VCC = 5V, VIN = VIH or VIL, VO = 1.5V(3)
60
115
–60
–115
VOH
Output HIGH Voltage
VCC = Min
IOH = –16mA MIL
2.4
3.3
VIN = VIH or VIL
IOH = –24mA COM'L
VOL
Output LOW Voltage
VCC = Min
IOH = 16mA MIL
—
0.3
VIN = VIH or VIL
IOH = 24mA COM'L
NOTES:
1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. Duration of the condition can not exceed one second.
5. This test limit for this parameter is ±5µA at TA = –55°C.
Max. Unit
200
mA
–200
mA
—
V
0.55
V
3