IDT82P2282_09 Datasheet, PDF (146/381 Pages) Integrated Device Technology – Dual T1/E1/J1 Long Haul / Short Haul Transceiver

IDT82P2282
DUAL T1/E1/J1 LONG HAUL / SHORT HAUL TRANSCEIVER
T1/J1 Interrupt Enable Control 1 (034H, 134H)
Bit No.
Bit Name
Type
Default
7
Reserved
6
DAC_IE
R/W
0
5
TJA_IE
R/W
0
4
RJA_IE
R/W
0
3
Reserved
2
EXZ_IE
R/W
0
1
CV_IE
R/W
0
0
CNT_IE
R/W
0
DAC_IE:
= 0: Disable the interrupt on the INT pin when the DAC_IS bit (b6, T1/J1-03BH,...) is ‘1’.
= 1: Enable the interrupt on the INT pin when the DAC_IS bit (b6, T1/J1-03BH,...) is ‘1’.
TJA_IE:
= 0: Disable the interrupt on the INT pin when the TJA_IS bit (b5, T1/J1-03BH,...) is ‘1’.
= 1: Enable the interrupt on the INT pin when the TJA_IS bit (b5, T1/J1-03BH,...) is ‘1’.
RJA_IE:
= 0: Disable the interrupt on the INT pin when the RJA_IS bit (b4, T1/J1-03BH,...) is ‘1’.
= 1: Enable the interrupt on the INT pin when the RJA_IS bit (b4, T1/J1-03BH,...) is ‘1’.
EXZ_IE:
= 0: Disable the interrupt on the INT pin when the EXZ_IS bit (b2, T1/J1-03BH,...) is ‘1’.
= 1: Enable the interrupt on the INT pin when the EXZ_IS bit (b2, T1/J1-03BH,...) is ‘1’.
CV_IE:
= 0: Disable the interrupt on the INT pin when the CV_IS bit (b1, T1/J1-03BH,...) is ‘1’.
= 1: Enable the interrupt on the INT pin when the CV_IS bit (b1, T1/J1-03BH,...) is ‘1’.
CNT_IE:
= 0: Disable the interrupt on the INT pin when the CNTOV_IS bit (b0, T1/J1-03BH,...) is ‘1’.
= 1: Enable the interrupt on the INT pin when the CNTOV_IS bit (b0, T1/J1-03BH,...) is ‘1’.
Programming Information
146
August 20, 2009