ICS9FG108D Datasheet, PDF (13/18 Pages) Integrated Device Technology – Frequency Generator for CPU, QPI, FBD, PCIe Gen 2 & SATA

ICS9FG108D
Frequency Generator for CPU, QPI, FBD, PCIe Gen 2 & SATA
DIF_STOP# - Assertion (transition from '1' to '0')
Asserting DIF_STOP# pin stops all DIF outputs that are set to be stoppable after their next transition. When the SMBus
DIF_STOP tri-state bit corresponding to the DIF output of interest is programmed to a '0', DIF output will stop DIF_True =
HIGH and DIF_Complement = LOW. When the SMBus DIF_STOP tri-state bit corresponding to the DIF output of interest is
programmed to a '1', DIF outputs will be tri-stated.
DIF_STOP#
DIF
DIF#
DIF_STOP# - De-assertion (transition from '0' to '1')
With the de-assertion of DIF_STOP# all stopped DIF outputs will resume without a glitch. The maximum latency from the
de-assertion to active outputs is 2 - 6 DIF clock periods. If the control register tristate bit corresponding to the output of
interest is programmed to '1', then the stopped DIF outputs will be driven High within 15nS of DIF_Stop# de-assertion to a
voltage greater than 200mV.
DIF_Stop#
DIF
DIF#
DIF Internal
Tdrive_DIF_Stop, 15nS >200mV
IDT^TM Frequency Generator for CPU, QPI, FBD, PCIe Gen 2 & SATA
13
1542E 12/16/10