82P33814_17 Datasheet, PDF (12/12 Pages) Integrated Device Technology – Synchronization Management Unit for IEEE 1588 and 10G/40G/100G Synchronous Ethernet

82P33814 Datasheet
ORDERING INFORMATION
Table 2: Ordering Information
Part/Order Number
82P33814ANLG
82P33814ANLG8
82P33814ANLG/W
Package
72-pin QFN green package
72-pin QFN green package
72-pin QFN green package
Shipping Packaging
Tray
Tape & Reel, Pin 1 Orientation: EIA-481-C
Tape & Reel, Pin 1 Orientation: EIA-481-D
"G" after the two-letter package code denotes Pb-Free configuration, RoHS compliant.
Temperature
-40^o to +85^oC
-40^o to +85^oC
-40^o to +85^oC
Table 3: Pin 1 Orientation in Tape and Reel Packaging
Part Number Suffix
Pin 1 Orientation
Illustration
Correct Pin 1 ORIENTATION
CARRIER TAPE TOPSIDE
(Round Sprocket Holes)
NLG8
Quadrant 1 (EIA-481-C)
NLG/W
Quadrant 2 (EIA-481-D)
USER DIRECTION OF FEED
Correct Pin 1 ORIENTATION
CARRIER TAPE TOPSIDE
(Round Sprocket Holes)
USER DIRECTION OF FEED
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
www.IDT.com
Sales
1-800-345-7015 or 408-284-8200
Fax: [phone]
www.IDT.com/go/sales
Tech Support
www.IDT.com/go/support
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time,
without notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same
way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability
of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not
convey any license under intellectual property rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be rea-
sonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property
of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. Integrated Device Technology, Inc. All rights reserved.
©2017 Integrated Device Technology, Inc.
16
Revision 7, January 9, 2017