English
Language : 

ICS8512061I Datasheet, PDF (11/17 Pages) Integrated Device Technology – SINGLE CHANNEL 0.7V DIFFERENTIALTO-LVTTL TRANSCEIVER
ICS8512061I
SINGLE CHANNEL 0.7V DIFFERENTIAL-TO-LVTTL TRANSCEIVER
Power Considerations (HCSL Outputs)
This section provides information on power dissipation and junction temperature for the ICS8512061I.
Equations and example calculations are also provided.
1. Power Dissipation.
The total power dissipation for the ICS8512061I is the sum of the core power plus the power dissipated in the load(s).
The following is the power dissipation for VDD = 3.3V + 0.3V = 3.6V, which gives worst case results.
NOTE: Please refer to Section 3 for details on calculating power dissipated in the load.
• Power (core)MAX = VDD_MAX * IDD_MAX= 3.6V *20mA = 72mW
• Power (outputs)MAX = 46.8mW/Loaded Output pair
Total Power_MAX = 72mW + 46.8mW = 118.8mW
2. Junction Temperature.
Junction temperature, Tj, is the temperature at the junction of the bond wire and bond pad and directly affects the reliability of the device.
The maximum recommended junction temperature for HiPerClockS devices is 125°C.
The equation for Tj is as follows: Tj = θJA * Pd_total + TA
Tj = Junction Temperature
θJA = Junction-to-Ambient Thermal Resistance
Pd_total = Total Device Power Dissipation (example calculation is in section 1 above)
TA = Ambient Temperature
In order to calculate junction temperature, the appropriate junction-to-ambient thermal resistance θJA must be used. Assuming no air flow
and a multi-layer board, the appropriate value is 129.5°C/W per Table 5A below.
Therefore, Tj for an ambient temperature of 85°C with all outputs switching is:
85°C + 0.119W * 129.5°C/W = 100.4°C. This is well below the limit of 125°C.
This calculation is only an example. Tj will obviously vary depending on the number of loaded outputs, supply voltage, air flow and the type
of board (single layer or multi-layer).
Table 5A. Thermal Resistance θJA for 8 Lead TSSOP, Forced Convection
θJA vs. Air Flow
Meters per Second
0
Multi-Layer PCB, JEDEC Standard Test Boards
129.5°C/W
1
125.5
2.5
123.5
IDT™ / ICS™ TRANSCEIVER
11
ICS8512061AGI REV. B NOVEMBER 19, 2008