843S1066D Datasheet, PDF (11/15 Pages) Integrated Device Technology – Crystal-to-3.3V LVPECL Frequency Synthesizer

3. Calculations and Equations.
The purpose of this section is to calculate the power dissipation for the LVPECL output pair.
LVPECL output driver circuit and termination are shown in Figure 6.
V_CC
843S1066D Datasheet
Q1
V_OUT
RL
V_CC - 2V
Figure 6. LVPECL Driver Circuit and Termination
To calculate worst case power dissipation into the load, use the following equations which assume a 50 load, and a termination voltage of
V_CC – 2V.
• For logic high, V_OUT = V_{OH_MAX} = V_{CC_MAX} – 0.8V
(V_{CC_MAX} – V_{OH_MAX}) = 0.8V
• For logic low, V_OUT = V_{OL_MAX} = V_{CC_MAX} – 1.6V
(V_{CC_MAX} – V_{OL_MAX}) = 1.6V
Pd_H is power dissipation when the output drives high.
Pd_L is the power dissipation when the output drives low.
Pd_H = [(V_{OH_MAX} – (V_{CC_MAX} – 2V))/R_L] * (V_{CC_MAX} – V_{OH_MAX}) = [(2V – (V_{CC_MAX} – V_{OH_MAX}))/R_L] * (V_{CC_MAX} – V_{OH_MAX}) =
[(2V – 0.8V)/50] * 0.8V = 19.2mW
Pd_L = [(V_{OL_MAX} – (V_{CC_MAX} – 2V))/R_L] * (V_{CC_MAX} – V_{OL_MAX}) = [(2V – (V_{CC_MAX} – V_{OL_MAX}))/R_L] * (V_{CC_MAX} – V_{OL_MAX}) =
[(2V – 1.6V)/50] * 1.6V = 12.8mW
Total Power Dissipation per output pair = Pd_H + Pd_L = 32mW
©2016 Integrated Device Technology, Inc.
11
Revision B, November 10, 2016