|
IDT72T51233 Datasheet, PDF (1/55 Pages) Integrated Device Technology – 2.5V MULTI-QUEUE FLOW-CONTROL DEVICES (32 QUEUES) 36 BIT WIDE CONFIGURATION 1,179,648 bits and 2,359,296 bits | |||
|
ADVANCE INFORMATION
2.5V MULTI-QUEUE FLOW-CONTROL DEVICES
(4 QUEUES) 18 BIT WIDE CONFIGURATION
589,824 bits, 1,179,648 bits and 2,359,296 bits
IDT72T51233
IDT72T51243
IDT72T51253
FEATURES:
⢠Choose from among the following memory density options:
IDT72T51233  Total Available Memory = 589,824 bits
IDT72T51243  Total Available Memory = 1,179,648 bits
IDT72T51253  Total Available Memory = 2,359,296 bits
⢠Configurable from 1 to 4 Queues
⢠Queues may be configured at master reset from the pool of
Total Available Memory in blocks of 512 x 18 or 1,024 x 9
⢠Independent Read and Write access per queue
⢠User programmable via serial port
⢠User selectable I/O: 2.5V LVTTL, 1.5V HSTL, 1.8V eHSTL
⢠Default multi-queue device configurations
-IDT72T51233: 8,192 x 18 x 4Q
-IDT72T51243: 16,384 x 18 x 4Q
-IDT72T51253: 32,768 x 18 x 4Q
⢠100% Bus Utilization, Read and Write on every clock cycle
⢠200 MHz High speed operation (5ns cycle time)
⢠3.6ns access time
⢠Echo Read Enable & Echo Read Clock Outputs
⢠Individual, Active queue flags (OV, FF, PAE, PAF)
⢠4 bit parallel flag status on both read and write ports
⢠Provides continuous PAE and PAF status of up to 4 Queues
⢠Global Bus Matching - (All Queues have same Input Bus Width
and Output Bus Width)
⢠User Selectable Bus Matching Options:
- x18in to x18out
- x9in to x18out
- x18in to x9out
- x9in to x9out
⢠FWFT mode of operation on read port
⢠Partial Reset, clears data in single Queue
⢠Expansion of up to 8 multi-queue devices in parallel is available
⢠Power Down Input provides additional power savings in HSTL
and eHSTL modes.
⢠JTAG Functionality (Boundary Scan)
⢠Available in a 256-pin PBGA, 1mm pitch, 17mm x 17mm
⢠HIGH Performance submicron CMOS technology
⢠Industrial temperature range (-40°C to +85°C) is available
FUNCTIONAL BLOCK DIAGRAM
MULTI-QUEUE FLOW-CONTROL DEVICE
WADEN
FSTR
WRADD
Q0
5
WEN
WCLK
Din
x9, x18
DATA IN
FF
Q3
PAF
PAFn
4
RADEN
ESTR
RDADD
5 REN
RCLK
EREN
ERCLK
OE
Qout
x9, x18
DATA OUT
OV
PAE
PAEn
4
6115 drw01
IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES
1
2003 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice.
NOVEMBER 2003
DSC-6115/2
|
▷ |