ADC1006S055 Datasheet, PDF (1/30 Pages) NXP Semiconductors – Single 10 bits ADC, up to 55 MHz or 70 MHz

ADC1006S055/070
Single 10 bits ADC, up to 55 MHz or 70 MHz
Rev. 03 — 2 July 2012
Product data sheet
1. General description
The ADC1006S055/070 are a family of Bipolar CMOS (BiCMOS) 10-bit Analog-to-Digital
Converters (ADC) optimized for a wide range of applications such as cellular
infrastructures, professional telecommunications, imaging, and digital radio. It converts
the analog input signal into 10-bit binary coded digital words at a maximum sampling rate
of 70 MHz. All static digital inputs (SH, CE and OTC) are Transistor-Transistor Logic (TTL)
and CMOS compatible and all outputs are CMOS compatible. A sine wave clock input
signal can also be used.
2. Features
 10-bit resolution
 Sampling rate up to 70 MHz
 3 dB bandwidth of 245 MHz
 5 V power supplies and 3.3 V output power supply
 Binary or two’s complement CMOS outputs
 In-range CMOS compatible output
 TTL and CMOS compatible static digital inputs
 TTL and CMOS compatible digital outputs
 Differential AC or Positive Emitter-Coupled Logic (PECL) clock input; TTL compatible
 Power dissipation 550 mW (typical)
 Low analog input capacitance (typical 2 pF), no buffer amplifier required
 Integrated sample-and-hold amplifier
 Differential analog input
 External amplitude range control
 Voltage controlled regulator included
 40 C to +85 C ambient temperature
3. Applications
High-speed analog-to-digital conversion for:
 Cellular infrastructure
 Professional telecommunication
 Digital radio
 Radar
 Medical imaging
 Fixed network
 Cable modem
®