ADC1005S060 Datasheet, PDF (1/18 Pages) NXP Semiconductors – Single 10 bits ADC, up to 60 MHz

ADC1005S060
Single 10 bits ADC, up to 60 MHz
Rev. 03 — 2 July 2012
Product data sheet
1. General description
The ADC1005S060 is a 10-bit high-speed low-power Analog-to-Digital Converter (ADC)
for professional video and other applications. It converts the analog input signal into 10-bit
binary or gray coded digital words at a maximum sampling rate of 60 MHz. All digital
inputs and outputs are Transistor-Transistor Logic (TTL) and CMOS compatible, although
a low-level sine wave clock input signal is allowed.
The device requires an external source to drive its reference ladder.
2. Features
 10-bit resolution (binary or gray code)
 Sampling rate up to 60 MHz
 DC sampling allowed
 One clock cycle conversion only
 High signal-to-noise ratio over a large analog input frequency range (9.3 effective bits
at 5 MHz full-scale input at f_clk = 60 MHz)
 No missing codes guaranteed
 In-Range (IR) CMOS output
 TTL and CMOS levels compatible digital inputs
 2.7 V to 3.6 V CMOS digital outputs
 Low-level AC clock input signal allowed
 External reference voltage regulator
 Power dissipation only 312 mW (typical)
 Low analog input capacitance, no buffer amplifier required
 No sample-and-hold circuit required
3. Applications
 Video data digitizing
 Radar
 Barcode scanners
 Digital instrumentation
 Transient signal analysis
  modulators
 Medical imaging
®