8T49N1012 Datasheet, PDF (1/57 Pages) Integrated Device Technology – FemtoClock NG 12-Output Frequency Synthesizer

FemtoClock^® NG 12-Output 
Frequency Synthesizer
8T49N1012
Datasheet
General Description
The 8T49N1012 has one fractional-feedback PLL that can be used
for frequency synthesis. It is equipped with two integer and eight
fractional output dividers, allowing the generation of up to ten
different output frequencies, ranging from 8kHz to 1GHz. Eight of
these frequencies are completely independent of each other and the
inputs. Two more are related frequencies. The twelve outputs may
select among LVPECL, LVDS, HSCL or LVCMOS output levels.
This functionality makes it ideal to be used in any frequency
synthesis application, including 1G, 10G, 40G and 100G
Synchronous Ethernet, OTN, and SONET/SDH, including ITU-T
G.709 (2009) FEC rates.
The device supports Output Enable inputs and Lock and LOS status
outputs.
The device is programmable through an I²C interface. It also
supports I²C master capability to allow the register configuration to
be read from an external EEPROM.
Applications
• OTN or SONET / SDH equipment Line cards (up to OC-192, and
supporting FEC ratios)
• Gigabit and Terabit IP switches / routers
• Wireless base station baseband
• Data communications
Features
• <350fs RMS typical jitter (including spurs), @122.88MHz (12kHz
to 20MHz)
• Operating modes: locked to input signal and free-run
• Operates from a 10MHz to 40MHz fundamental-mode crystal
• Accepts one LVPECL, LVDS, LVHSTL, HCSL or LVCMOS input
clock
• Accepts frequencies ranging from 10MHz up to 600MHz
• Clock input monitoring
• Generates 12 LVPECL / LVDS / HSCL or 24 LVCMOS output
clocks
• Output frequencies ranging from 8kHz up to 1.0GHz (Q[8:11],
Differential)
• Output frequencies ranging from 8kHz to 250MHz (LVCMOS)
• Two Output Enable control inputs
• Lock and Loss-of-Signal status outputs
• Programmable output de-skew adjustments in steps as small as
16ps
• Register programmable through I²C or via external I²C EEPROM
• Bypass clock paths and Reference Output for system tests
• Power supply modes:
V_CC
3.3V
/ V_CCA
/ 3.3V
/
/
3V.^C3^CV^O ^
3.3V / 3.3V / 2.5V
3.3V / 3.3V / 1.8V (LVCMOS)
2.5V / 2.5V / 3.3V
2.5V / 2.5V / 2.5V
2.5V / 2.5V / 1.8V (LVCMOS)
• -40°C to 85°C ambient operating temperature
• Package: 72QFN, lead-free RoHs (6)
©2016 Integrated Device Technology, Inc.
1
October 28, 2016