|
8L30210 Datasheet, PDF (1/20 Pages) Integrated Device Technology – Crystal or Differential to LVCMOS/ LVTTL Clock Buffer | |||
|
Crystal or Differential to LVCMOS/
LVTTL Clock Buffer
8L30210
DATA SHEET
General Description
The 8L30210 is a low skew, 1-to-10 LVCMOS / LVTTL Fanout Buffer.
The low impedance LVCMOS/LVTTL outputs are designed to drive
50ï series or parallel terminated transmission lines.
The 8L30210 is characterized at full 3.3V and 2.5V, mixed 3.3V/2.5V,
3.3V/1.8V, 3.3V/1.5V, 2.5V/1.8V and 2.5V/1.5V output operating
supply modes. The input clock is selected from two differential clock
inputs or a crystal input. The differential input can be wired to accept
a single-ended input. The internal oscillator circuit is automatically
disabled if the crystal input is not selected.
Features
⢠Ten LVCMOS / LVTTL outputs up to 200MHz
⢠Differential input pair can accept the following differential input
levels: LVPECL, LVDS, HCSL
⢠Crystal Oscillator Interface
⢠Crystal input frequency range: 10MHz to 40MHz
⢠Additive RMS phase jitter: 30fs (typical)
⢠Synchronous output enable to avoid clock glitch
⢠Power supply modes:
Core / Output
3.3V / 3.3V
2.5V / 2.5V
3.3V / 2.5V
3.3V / 1.8V
3.3V / 1.5V
2.5V / 1.8V
2.5V / 1.5V
⢠Supports case temperature up to 105°C
⢠-40°C to 85°C ambient operating temperature
⢠Available in lead-free (RoHS 6) package
Block Diagram
Pin Assignment
32 31 30 29 28 27 26 25
Q0 1
24 Q9
VDDO 2
23 VDDO
00
Q1 3
22 Q8
GNDO 4
21 GNDO
01
8L30210
Q2 5
20 Q7
VDDO 6
19 VDDO
1x
Q3 7
18 Q6
Q4 8
17 Q5
9 10 11 12 13 14 15 16
8L30210 REVISION 2 11/24/15
32-pin, 5mm x 5mm VFQFN Package
1
©2015 Integrated Device Technology, Inc.
|
▷ |