ICS9248-95 Datasheet, PDF (9/16 Pages) Integrated Circuit Systems – Frequency Generator & Integrated Buffers for PENTIUM/ProTM

ICS9248 - 95
PCI_STOP# Timing Diagram
PCI_STOP# is an asynchronous input to the ICS9248-95. It is used to turn off the PCICLK [4:0] clocks for low power operation.
PCI_STOP# is synchronized by the ICS9248-95 internally. The minimum that the PCICLK [4:0] clocks are enabled (PCI_STOP#
high pulse) is at least 10 PCICLK [4:0] clocks. PCICLK [4:0] clocks are stopped in a low state and started with a full high pulse
width guaranteed. PCICLK [4:0] clock on latency cycles are only one rising PCICLK clock off latency is one PCICLK clock.
Notes:
1. All timing is referenced to the Internal CPUCLK (defined as inside the ICS9248 device.)
2. PCI_STOP# is an asynchronous input, and metastable conditions may exist. This signal is required to be synchronized
inside the ICS9248.
3. All other clocks continue to run undisturbed.
4. CPU_STOP# is shown in a high (true) state.
310D—04/12/05
9