ICS670-02 Datasheet, PDF (4/6 Pages) Integrated Circuit Systems – LOW PHASE NOISE, ZERO DELAY BUFFER AND MULTIPLIER

ICS670-02
LOW PHASE NOISE, ZERO DELAY BUFFER AND MULTIPLIER
Parameter
Short Circuit Current
Internal Pull-up Resistor
Input Capacitance
Symbol
Conditions
I_OS Each output
R_PU OE, select pins
C_IN OE, select pins
Min.
Typ.
±50
200
5
Max.
Units
mA
kΩ
pF
AC Electrical Characteristics
VDD = 3.3V ±10%, Ambient Temperature -40 to +85°C, unless stated otherwise
Parameter
Symbol
Conditions
Min. Typ. Max. Units
Input Clock Frequency
Output Clock Frequency
f_IN
See table on page 2
5
160 MHz
160 MHz
Output Rise Time
Output Fall Time
Output Clock Duty Cycle
Input to Output Skew
t_OR 0.8 to 2.0 V, no load
t_OF 2.0 to 0.8 V, no load
t_DC measured at VDD/2
Note 1
1.5 ns
1.5 ns
45
50 55
%
±100
ps
Maximum Absolute Jitter
short term
±45
ps
Maximum Jitter
one sigma
15
ps
Phase Noise, relative to
carrier, 125 MHz (x5)
100 Hz offset
1 kHz offset
-103
-117
dBc/Hz
dBc/Hz
10 kHz
-111
dBc/Hz
200 kHz
-88
dBc/Hz
Note 1: Rising edge of ICLK compared with rising edge of CLK2, with FBCLK connected to FBIN, and 15
pF load on CLK2.
Thermal Characteristics
Parameter
Symbol Conditions
Thermal Resistance Junction to
Ambient
θ_JA Still air
θ_JA 1 m/s air flow
θ_JA 3 m/s air flow
Thermal Resistance Junction to Case θ_JC
Min.
Typ.
120
115
105
58
Max.
Units
°C/W
°C/W
°C/W
°C/W
MDS 670-02 F
4
Revision 031805
Integrated Circuit Systems l 525 Race Street, San Jose, CA 95126 l tel [phone] l www.icst.com