ICS670-02 Datasheet, PDF (1/6 Pages) Integrated Circuit Systems – LOW PHASE NOISE, ZERO DELAY BUFFER AND MULTIPLIER

ICS670-02
LOW PHASE NOISE, ZERO DELAY BUFFER AND MULTIPLIER
Description
The ICS670-02 is a high speed, low phase noise, Zero
Delay Buffer (ZDB) which integrates ICS’ proprietary
analog/digital Phase Locked Loop (PLL) techniques.
Part of ICS’ ClockBlocks^TM family, the part’s zero delay
feature means that the rising edge of the input clock
aligns with the rising edges of the outputs giving the
appearance of no delay through the device. There are
two identical outputs on the chip. The FBCLK should be
used to connect to the FBIN. Each output has its own
output enable pin.
The ICS670-02 is ideal for synchronizing outputs in a
large variety of systems, from personal computers to
data communications to video. By allowing off-chip
feedback paths, the chip can eliminate the delay
through other devices. The 15 different on-chip
multipliers work in a variety of applications. For other
multipliers, including functional multipliers, see the
ICS527.
Block Diagram
Features
• Packaged in 16-pin SOIC
• Available in Pb (lead) free package
• Clock inputs from 5 to 160 MHz (see page 2)
• Patented PLL with low phase noise
• Output clocks up to 160 MHz at 3.3 V
• 15 selectable on-chip multipliers
• Power down mode available
• Low phase noise: -111 dBc/Hz at 10 kHz
• Output enable function tri-states outputs
• Low jitter 15 ps one sigma
• Advanced, low power, sub-micron CMOS process
• Operating voltage of 3.3 V or 5 V
ICLK
FBIN
Divide by
N
VDD
3
Phase
Detector,
Charge
Pump, and
Loop Filter
OE1
Voltage
Controlled
Oscillator
S3:S0
4
3
GND
External Feedback from FBCLK is recommended.
OE2
FBCLK
CLK2
MDS 670-02 F
1
Revision 031805
Integrated Circuit Systems l 525 Race Street, San Jose, CA 95126 l tel [phone] l www.icst.com