ICS9150-04 Datasheet, PDF (1/19 Pages) Integrated Circuit Systems – Pentium Pro™ and SDRAM Frequency Generator

Integrated
Circuit
Systems, Inc.
ICS9150- 04
Pentium Pro™ and SDRAM Frequency Generator
General Description
The ICS9150-04 generates all clocks required for high speed
RISC or CISC microprocessor systems such as Intel
PentiumPro or Cyrix. Eight different reference frequency
multiplying factors are selectable from 50 to 83.3MHz.
Features include five CPU, seven PCI and Sixteen SDRAM
clocks. One reference output is available equal to the crystal
frequency, plus three IOAPIC outputs powered by VDDL1.
One 48 MHz for USB is provided plus a 24 MHz. Spread
Spectrum built in up to ±1.5% modulation to reduce EMI.
Serial programming I²C interface allows changing functions,
stop clock programing and Frequency selection. Rise time
adjustment for VDD at 3.3V or 2.5V CPU. Additionally, the
device meets the Pentium power-up stabilization, which
requires that CPU and PCI clocks be stable within 2ms after
power-up.
High drive PCICLK and SDRAM outputs typically provide
greater than 1 V/ns slew rate into 30pF loads. CPUCLK outputs
typically provide better than 1V/ns slew rate into 20pF loads
while maintaining 50±5% duty cycle. The REF 24 and 48 MHz
and SDRAM 12, 13 clock outputs typically provide better
than 0.5V/ns slew rates.
Features
• Generates five processor, six bus, one 14.31818MHz
(3.3V) three IOAPIC, 16 SDRAM clocks, 48MHz USB
clock and 24MHz Super I/O clock.
• Synchronous clocks skew matched to 250 ps window
on CPUCLKs and 500ps window on PCICLKs
• Skew from CPU (earlier) to PCI clock - 1 to 4ns, 2.6ns
nom.
• Power Management Control Input pins when MODE
Low
• VDD(1:4) - 3.3V ±10%
(inputs 5V tolerant w/series R )
• VDDL(1:2) - 2.5V or 3.3V ±5%
• I²C interface for programming stopclocks plus spread
spectrum options (±0.5% or ±1.5%, center spread or
down spread)
• 56-pin SSOP package
Pin Configuration
Block Diagram
Pentium is a trademark of Intel Corporation
I²C is a trademark of Philips Corporation.
9150-04 RevD 07/27/98
56-Pin SSOP
Power Groups
VDD1 = REF, X1, X2
VDD2 = PCICLK_F, PCICLK(0:5)
VDD3 = SDRAM (0:15), supply for PLL core,
VDD4 = 48MHz, 24MHz
VDDL1 = IOAPIC (0:2)
VDDL2 = CPUCLK (0:4)
ICS reserves the right to make changes in the device data identified in this
publication without further notice. ICS advises its customers to obtain the latest
version of all device data to verify that any information being relied upon by the
customer is current and accurate.