ICS9148-18 Datasheet, PDF (1/11 Pages) Integrated Circuit Systems – Pentium/ProTM System Clock Chip

Integrated
Circuit
Systems, Inc.
ICS9148-18
Pentium/Pro^TM System Clock Chip
General Description
The ICS9148-18 is a Clock Synthesizer chip for Pentium and
PentiumPro CPU based Desktop/Notebook systems that will
provide all necessary clock timing.
Features include two CPU and six PCI clocks. One reference
output is available equal to the crystal frequency. Additionally,
the device meets the Pentium power-up stabilization
requirement, acheiving stable CPU and PCI clocks 2ms after
power-up.
PD# pin can enable a low power mode by stopping crystal
OSC and PLL stages. Other power management features
include, CPU_STOP# which stops CPU (0:1) clocks, and
PCI_STOP# which stops PCICLK (0:4) clocks.
High drive CPUCLK outputs typically provide greater than 1
V/ns slew rate into 20pF loads. PCICLK outputs typically
provide better than 1V/ns slew rate into 30pF loads while
maintaining50±5% duty cycle. The REF clock output typically
provides better than 0.5V/ns slew rates.
The ICS9148-18 accepts a 14.318MHz reference crystal or
clock as its input and runs on a 3.3V core supply.
Features
• Generates system clocks for CPU, PCI,
plus 14.314 MHz REF0.
• Supports single or dual processor systems
• Skew from CPU (earlier) to PCI clock (rising edges for
100/33.3MHz) 1 to 4ns
• Separate 2.5V and 3.3V supply pins
• 2.5V or 3.3V output: CPU
• 3.3V outputs: PCI, REF
• No power supply sequence requirements
• Uses external 14.318MHz crystal, no external load cap
required for C_L=18pF crystal
• 28 pin 209 mil SSOP
Pin Configuration
Block Diagram
9148-18 Rev B 07/08/98
28 pin SSOP
Power Groups
VDD = Supply for PLL core
VDD1 = REF0, X1, X2
VDD2 = PCICLK_F, PCICLK (0:4)
VDDL = CPUCLK (0:1)
Ground Groups
GND = Ground Source Core
GND1 = REF0, X1, X2
GND2 = PCICLK_F, PCICLK (0:4)
GNDL = CPUCLK (0:1)
Pentium is a trademark on Intel Corporation.
ICS reserves the right to make changes in the device data identified in this
publication without further notice. ICS advises its customers to obtain the latest
version of all device data to verify that any information being relied upon by the
customer is current and accurate.