IC-LNG Datasheet, PDF (6/25 Pages) IC-Haus GmbH – 16-BIT OPTO ENCODER WITH SPI AND SERIAL /PARALLEL OUTPUTS

iC-LNG 16-BIT OPTO ENCODER ^preliminary
WITH SPI AND SERIAL / PARALLEL OUTPUTS
Rev A1, Page 6/25
ABSOLUTE MAXIMUM RATINGS
Maximum ratings do not constitute permissible operating conditions; functionality is not guaranteed.
Exceeding the maximum ratings can damage the device.
Item Symbol Parameter
No.
Conditions
G001 VDDA
Voltage at VDDA
G002 VDD
Voltage at VDD
G003 V(GND) Voltage at GND
G004 V()
Voltage at LED, PCOS, NCOS, PSIN,
NSIN, TPC, TNC, TPS, TNS
G005 V()
Voltage at INCA, INCB, INCZ, ERR,
CLK, DOUT, DIN, NSL, CS, MOSI,
MISO, SCK, PO6, PO5, POK, TPC,
TNC, TPS, TNS
G006 I(VDDA) Current in VDDA
G007 I(VDD) Current in VDD
G008 I(GND) Current in GND
G009 I(LED) Current in LED
G010 I()
Current in INCA, INCB, INCZ, ERR,
CLK, DOUT, DIN, NSL, CS, MOSI,
MISO, SCK, PO6, PO5, POK
G011 I()
Current in PCOS, NCOS, PSIN, NSIN,
TPC, TNC, TPS, TNS
G012 Vd()
ESD Susceptibility at all pins
HBM, 100 pF discharged through 1.5 kΩ
G013 Tj
Chip-Temperature
G014 Ts
Storage Temperature Range
see package specification
Min.
-0.3
-0.3
-0.3
-0.3
Unit
Max.
6
V
VDDA+0.3 V
0.3
V
VDDA+0.3 V
-0.3 VDD+0.3 V
-100
100
mA
-50
50
mA
-20
20
mA
-100
20
mA
-60
60
mA
-35
35
mA
2
kV
-40
125
°C
THERMAL DATA
Operating conditions: VDDA = 4 V to 5.5 V, VDD = 3 V to 5.5 V
Item Symbol Parameter
No.
Conditions
T01 Ta
Operating Ambient Temperature Range see package specification
Unit
Min. Typ. Max.
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.