IC-MFL Datasheet, PDF (5/13 Pages) IC-Haus GmbH – 8-/12-FOLD FAIL-SAFE LOGIC N-FET DRIVER

iC-MFL / iC-MFLT
8-/12-FOLD FAIL-SAFE LOGIC N-FET DRIVER
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed.
Item Symbol Parameter
No.
Conditions
G001 VCC
Supply Voltage
G002 V()
Voltage at OUT1...8/12
G003 Vp()
Peak Voltage at OUT1...8/12
t < 100 ms, duty cycle < 2 %
G004 V()
Voltage at IN1...8/12, EN
G005 V(GNDR) Voltage at GNDR referenced to GND
G006 V(GND) Voltage at GND referenced to GNDR
G007 Imx()
Current in OUT1...8/12, IN1...8/12, EN
G008 Imx()
Current in OUT1...8/12
t < 100 ms, duty cycle < 2 %
G009 Imx()
Current in VCC, GND
G010 Imx()
Current in GND, GNDR
t < 100 ms, duty cycle < 2 %
G011 Vd()
ESD susceptibility
HBM 100 pF discharged through 1.5 kΩ
G012 Tj
Operating Junction Temperature
G013 Ts
Storage Temperature Range
Rev C1, Page 5/13
Min.
-0.3
-0.3
-0.3
-0.3
-0.3
-0.3
-10
-10
-50
-100
-40
-55
Unit
Max.
6
V
6
V
18
V
6
V
0.3
V
0.3
V
10
mA
120
mA
50
mA
10
mA
2
kV
150
°C
125
°C
THERMAL DATA
Operating Conditions: VCC = 5 V ±10 %
Item Symbol Parameter
No.
Conditions
T01 Ta
Operating Ambient Temperature Range
T02 Rthja
Thermal Resistance Chip/Ambient SMD assembly, no additional cooling areas.
Unit
Min. Typ. Max.
-40
125 °C
75 K/W
All voltages are referenced to ground unless otherwise stated.
All currents into the device pins are positive; all currents out of the device pins are negative.