IC-TW4 Datasheet, PDF (4/14 Pages) IC-Haus GmbH – PROGRAMMABLE INTERPOLATOR WITH AUTOMATIC OFFSET CORRECTION

iC-TW4 PROGRAMMABLE INTERPOLATOR
WITH AUTOMATIC OFFSET CORRECTION
Rev D1, Page 4/14
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these values damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 VDD
Supply Voltage VDD
referenced to GND
-0.3
6
V
G002 V()
Voltage at
referenced to GND
PINA, NINA, PINB, NINB, PINZ, NINZ,
A, NA, B, NB, Z, NZ, CFG1, CFG2
-0.3
VDD +
V
0.5
G003 I()
Current in
PINA, NINA, PINB, NINB, PINZ, NINZ,
CFG1, CFG2, A, NA, B, NB, Z, NZ
-20
20
mA
G004 Vd
ESD Susceptibility Of Signal Output HBM, 100 pF discharged through 1.5kΩ
Pins: A, NA, B, NB, Z, NZ
2
kV
G005 Vd
ESD Susceptibility Of Remaining Pins: HBM, 100 pF discharged through 1.5kΩ
PINA, NINA, PINB, NINB, PINZ, NINZ,
CFG1, CFG2
1.5
kV
G006 Tj
Junction Temerature
-40
125
°C
G007 Ts
Storage Temperature
-40
125
°C
THERMAL DATA
Item
No.
T01
T02
Symbol
Ta
Rthaj
Parameter
Conditions
Operating Ambient Temperature
Thermal Resistance Chip To Ambient
QFN24 surface mounted to PCB, following
JEDEC 51
Unit
Min. Typ. Max.
-40
125 °C
32
K/W
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.