IC-HX_17 Datasheet, PDF (4/14 Pages) IC-Haus GmbH – 3-CHANNEL DIFFERENTIAL COLD LINE DRIVER

iC-HX
3-CHANNEL DIFFERENTIAL COLD LINE DRIVER
Rev D1, Page 4/14
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed. Absolute Maximum Ratings are no Operating Conditions.
Integrated circuits with system interfaces, e.g. via cable accessible pins (I/O pins, line drivers) are per principle endangered by injected
interferences, which may compromise the function or durability. The robustness of the devices has to be verified by the user during system
development with regards to applying standards and ensured where necessary by additional protective circuitry. By the manufacturer
suggested protective circuitry is for information only and given without responsibility and has to be verified within the actual system with
respect to actual interferences.
Item Symbol
No.
G001 VCC
G002 VBx
G003 V()
G004 I(Ax)
G005 I(Ex)
G006 V(NER)
G007 I(NER)
G008 V()
G009 Tj
G010 Ts
Parameter
Conditions
Voltage at VCC
Voltages at VB1, VB2, VB3
Voltage at E1...6, A1...6, DIFF, ENA,
TNER, NXS, CXS1, CXS6
Current in Ax (x=1...6)
Current in E1...E6, Diff, ENA, TNER,
NXS
Voltage at NER
Current in NER
ESD Suceptibility at all pins
Operating Junction Temperature
Storage Temperature Range
CDM (JEDEC Standard No. 22-C101F)
Min.
0
0
0
-800
-4
0
-4
-40
-40
Unit
Max.
7
V
40
V
40
V
800
mA
4
mA
40
V
25
mA
500
V
140
°C
150
°C
THERMAL DATA
Operating conditions: VB1. . . 3 = 4.5. . . 40 V, VCC = 4.5. . . 5.5 V or VB1. . . 3 = VCC = 4. . . 5.5 V
Item Symbol Parameter
No.
Conditions
T01 Ta
Operating Ambient Temperature Range
T02 Rthja
Thermal Resistance Chip to Ambient surface mounted, thermal pad soldered to
approx. 2 cm² heat sink
Unit
Min. Typ. Max.
-40
125 °C
40
K/W
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.