IC-DL_17 Datasheet, PDF (4/10 Pages) IC-Haus GmbH – 3-CHANNEL DIFFERENTIAL LINE DRIVER

iC-DL
3-CHANNEL DIFFERENTIAL LINE DRIVER
Rev C1, Page 4/10
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed. Absolute Maximum Ratings are no Operating Conditions.
Integrated circuits with system interfaces, e.g. via cable accessible pins (I/O pins, line drivers) are per principle endangered by injected
interferences, which may compromise the function or durability. The robustness of the devices has to be verified by the user during system
development with regards to applying standards and ensured where necessary by additional protective circuitry. By the manufacturer
suggested protective circuitry is for information only and given without responsibility and has to be verified within the actual system with
respect to actual interferences.
Item Symbol
No.
G001 VCC
G002 VBx
G003 V()
G004 I(Ax)
G005 I(Ex)
G006 V(NER)
G007 I(NER)
G008 V()
G009 Tj
G010 Ts
Parameter
Conditions
Supply Voltage
Driver Supply Voltage VB1, VB2, VB3 pulse tested
Voltage at E1...6, A1...6, DIFF, ENA,
TNER
Driver Output Current (x=1...6)
Input Current Driver E1...E6, Diff, ENA,
TNER
Voltage at NER
pulse tested
Current in NER
ESD Suceptibility at all pins
HBM 100 pF discharged through 1.5 k Ω
Operating Junction Temperature
Storage Temperature Range
Min.
0
0
0
-800
-4
0
-4
-40
-40
Unit
Max.
7
V
40
V
36
V
800
mA
4
mA
36
V
25
mA
2
kV
140
°C
150
°C
THERMAL DATA
Operating Conditions: VB = 4...32 V, VCC = 4...5.5 V
Item Symbol Parameter
No.
Conditions
T01 Ta
Operating Ambient Temperature Range
(extended range to -40°C on request)
T02 Rthja
Thermal Resistance Chip to Ambient surface mounted, thermal pad soldered to
approx. 2 cm² heat sink
Unit
Min. Typ. Max.
-25
125 °C
40
K/W
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.