IC-DN_16 Datasheet, PDF (2/10 Pages) IC-Haus GmbH – LOWSIDE SWITCH

iC-DN
LOWSIDE SWITCH
Rev C1, Page 2/10
DESCRIPTION
iC-DN is a monolithic lowside switch for ohmic, induc-
tive and capacitive loads.
Designed for a wide input voltage range of 4 to 36 V,
it is capable of supplying a minimum output current
of 200 mA. The output acts as a current source with
a low saturation voltage; protection against short-cir-
cuiting is provided by the device shutting down with
excessive temperature. The chip is activated when
the input voltage threshold V(PI)−V(NI) of typically
3.5 V is exceeded.
With four leads, the input (PI, NI) and output (DN,
VN) reference voltages are decoupled. The maximum
permissive voltage difference between NI and VN is
36 V.
PACKAGING INFORMATION
PIN CONFIGURATION
SOT23-6L (JEDEC), 1.6 mm
6 54
<P-CODE>
(<A-CODE> on Bottom Side)
PIN FUNCTIONS
No. Name Function
1 n.c.
2 VN
3 NI
4 n.c.
5 PI
6 DN
Ground, Substrate
Input Reference Voltage
Positive Input, Supply
Output
1 23
dra_sot23-6l-1_pack_3a, 10:1
PIN CONFIGURATION
UDFN6-1.8x2
654
<P-CODE>
<A-CODE>
PIN FUNCTIONS
No. Name Function
1 NI
2 VN
3 n.c.
4 DN
5 n.c.
6 PI
Input Reference Voltage
Ground, Substrate
Output
Positive Input, Supply
1 23
dra_udfn6-18x20_pack_3a, 14:1