IC-RC1000_14 Datasheet, PDF (13/14 Pages) IC-Haus GmbH – SIN/COS SIGNAL SAFETY MONITOR IC

iC-RC1000
SIN/COS SIGNAL SAFETY MONITOR IC
DESIGN REVIEW: Function Notes
Rev C2, Page 13/14
iC-RC1000 1
No.
Function, Parameter/Code
1
Elec. Char. No. 314
Description and Application Notes
Maximum limit of up to 30 ms
Table 6: Notes on chip functions regarding iC-RC1000 chip release 1
iC-RC1000 Z1
No.
Function, Parameter/Code
Description and Application Notes
—
Table 7: Notes on chip functions regarding iC-RC1000 chip release Z1
REVISION HISTORY
Rel Rel.Date Chapter
Modification
C1 14-09-22 FEATURES
Monitoring of input frequencies from 0 to 100 kHz
DESCRIPTION
Text updated
ELECTRICAL CHARACTERISTICS
Item 001: min and max values, item 005: max value
Item 003, 007, 008: new entries
Item 306, 307: conditions edited
Fig. 1 and 2: new pictures
APPLICATION NOTES
Descriptions supplemented, Fig. 3 updated;
New section added: Monitoring of phase shift (Table 5, Fig. 5)
EVALUATION BOARD
New chapter added
ORDERING INFORMATION
Inclusion of eval board
Rel Rel.Date Chapter
Modification
C2 14-10-27 FEATURES
DC check and Lissajous monitoring within frequency limits
DESCRIPTION
Text updated regarding OK and ERR messaging
ELECTRICAL CHARACTERISTICS Item 001, 005: conditions, correction of max. value
APPLICATION NOTES
New section on using external OP amps.
Page
1
2
6
8
11, 12
14
Page
1
2
6
10
iC-Haus expressly reserves the right to change its products and/or specifications. An info letter gives details as to any amendments and additions made to the
relevant current specifications on our internet website www.ichaus.com/infoletter; this letter is generated automatically and shall be sent to registered users by
email.
Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.
iC-Haus does not warrant the accuracy, completeness or timeliness of the specification and does not assume liability for any errors or omissions in these
materials.
The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of merchantability, fitness
for a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which information refers and no
guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or areas of applications of
the product.
iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably be expected
to result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applications include, without
limitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications or environments or in
automotive applications unless specifically designated for such use by iC-Haus.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade
mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.