English
Language : 

HYMD116G725BL8-M Datasheet, PDF (8/17 Pages) Hynix Semiconductor – Registered DDR SDRAM DIMM
HYMD116G725B(L)8-M/K/H/L
DC CHARACTERISTICS II (TA=0 to 70 oC, Voltage referenced to VSS=0V)
Parameter
Operating Current
Operating Current
Precharge Power Down
Standby Current
Idle Standby Current
Active Power Down
Standby Current
Active Standby Current
Operating Current
Operating Current
Auto Refresh Current
Self Refresh Current
Operating Current - Four
Bank Operation
Symbol
Test Condition
Speed
Unit Note
-M -K -H -L
IDD0
One bank; Active - Precharge; tRC=tRC(min);
tCK=tCK(min); DQ,DM and DQS inputs changing
twice per clock cycle; address and control inputs
1460
1370
1370
1370
mA
changing once per clock cycle
IDD1
One bank; Active - Read - Precharge;
Burst Length=2; tRC=tRC(min); tCK=tCK(min);
address and control inputs changing once per
1640 1550 1550 1370
mA
clock cycle
IDD2P
All banks idle; Power down mode ; CKE=Low,
tCK=tCK(min)
785
mA
/CS=High, All banks idle; tCK=tCK(min);
IDD2F
CKE=High; address and control inputs changing
once per clock cycle.
965
mA
VIN=VREF for DQ, DQS and DM
IDD3P
One bank active; Power down mode; CKE=Low,
tCK=tCK(min)
830
mA
/CS=HIGH; CKE=HIGH; One bank; Active-
Precharge; tRC=tRAS(max); tCK=tCK(min); DQ,
IDD3N DM and DQS inputs changing twice per clock
1010
mA
cycle; Address and other control inputs changing
once per clock cycle
Burst=2; Reads; Continuous burst; One bank
IDD4R active; Address and control inputs changing once 2360 2360 2360 2000 mA
per clock cycle; tCK=tCK(min); IOUT=0mA
Burst=2; Writes; Continuous burst; One bank
IDD4W
active; Address and control inputs changing once
per clock cycle; tCK=tCK(min); DQ, DM and DQS
2360
2360
2360
2000
mA
inputs changing twice per clock cycle
IDD5
tRC=tRFC(min) - 8*tCK for DDR200 at 100Mhz,
10*tCK for DDR266A & DDR266B at 133Mhz; 1700 1700 1700 1610 mA
distributed refresh
IDD6
CKE=<0.2V; External clock on;
tCK=tCK(min)
Normal
Low Power
368
359
mA
mA
IDD7
Four bank interleaving with BL=4, Refer to the
following page for detailed test condition
2990 2990 2990 2630 mA
Rev. 0.3/May. 02
8