HPMD-7904 Datasheet, PDF (6/8 Pages) Agilent(Hewlett-Packard) – FBAR Duplexer for US PCS Band

0.030±0.05
Note 2
4.00 ± 0.10
12.20 Note 4
Note 6
2.00 ± 0.10
φ1.50 ± 0.10
1.75 ± 0.1
Note 6
11.50 ± 0.10
24.00 ± 0.30
2.25 Note 5
6.60
Note 4
12.00 ± 0.10
φ1.50
Notes:
1. All dimensions in mm.
2. 10 sprocket hole pitch accumulative tolerance ± 0.10 mm
3. Camber not exceed 1 mm in 250 mm
4. Pocket dimensions measured on a plane 0.3 mm above the bottom of the pocket.
5. Pocket depth measured from a plane on the inside bottom of the pocket to the top surface of the carrier.
6. Pocket position on relative to sprocket hole measure as true position of pocket, not the pocket hole.
Figure 13. Tape Drawing.
R
6.26"
+1.00"
-0.50"
120.00° ± 0.50°
R 0.20"
R
5.27"
+1.00"
-0.50"
R
5:49"
+1.00"
-0.50"
13.00"
+0.40"
-0"
φ21.00±0.80
CONVEX = 0.5mm
2.00 ± 0.50
φ13.00"+-00..5200""
R
6.26"
+1.00"
-0.50"
0.22"
Notes:
1. All dimensions in mm, unless otherwise noted.
2. Material: polystyrene
3. Surface resistivity: 1x10⁹ ohm-mm²
Figure 14. Reel Drawing.
R
2.00"
+1.00"
-0.50"
R
2.00"
+1.00"
-0.50"
100.00
+2.00
-0
2.20
6