HBCR-2210 Datasheet, PDF (6/15 Pages) Agilent(Hewlett-Packard) – Programmable Bar Code Decode ICs

Feature
Check Character
Verification Enable
Check Character
Transmission
Enable
Code 39 Full ASCII
Conversion Enable
UPC/EAN/JAN
Decoding Options
Selection
Function or Value
For Code 39
For Interleaved 2 of 5
When enabled, the check character
at the end of the bar code data
is verified by the decoder
For both Code 39 and Interleaved
2 of 5, the check characters
verified by the reader are
included at the end of the
decoded message
Extended Code 39 data will be
converted to ASCII characters
UPC/EAN/JAN vs. UPC only
Enable 2 or 5 digit supplements
Codabar Data
Start/Stop
Transmission Enable
Code 11 Check Digit
Verification Selection
Baud Rates
Parity
Autodiscrimination of tags with
and without supplements
Transmit or suppress start/stop
characters
Selection of 1 or 2 check digits
150, 300, 600, 1200, 2400,
4800, 9600, 19200
0s, 1s, Odd, Even
Stop Bits
1 or 2
RTS/CTS Pacing
Enable
Xon/Xoff Pacing
Enable
Transmitted Char-
acter Delay Enable
Transmitted Char-
acter Delay
Selection
Request-To-Send/Clear-To-Send
Pacing controls serial port
data transmission
Controls data transmission on
serial or parallel port by means
of control characters sent to
decoder IC
Specifies whether a delay is
inserted between characters
transmitted on the serial port
Specifies the number of milli-
seconds to insert between
completion of transmission of
one character and beginning of
transmission of the next
(1 to 250 ms)
Selection
Software
Software
Software
Software
Software
Software
Software
Software
Both
Both
Both
Software
Software
Software
Software
Default Setting
Disabled
Disabled
Disabled
Disabled
UPC/EAN/JAN
Enabled
Supplements
Disabled
Disabled
Transmit
1 check digit
Depends on pins
BR1, BR0, and SMD
Depends on pins
EEP, PT1 and PT0
Depends on
pins SMD and STB
Enabled
Disabled
Disabled
20 msec
(continued)
4-52