HDMP-0450 Datasheet, PDF (5/10 Pages) Agilent(Hewlett-Packard) – Quad Port Bypass Circuit for Fibre Channel Arbitrated Loops

Pin Definitions, continued
GND
01 S
08
11
12
13
19
22
23
33
39
VCCHS[0]
VCCHS[1]
VCCHS[2]
VCCHS[3]
VCCHS[4]
26 S
05 S
42 S
36 S
29 S
VCC
02 S
21
32
Ground: Normally 0 volts. See Figure 9 for Recommended Power Supply Filtering.
High Speed Supply: Normally 3.3 volts. Used only for high-speed outputs
(TO_NODE[n]). See Figure 9 for Recommended Power Supply Filtering.
Logic Power Supply: Normally 3.3 volts. Used for internal logic.
See Figure 9 for Recommended Power Supply Filtering.
Absolute Maximum Ratings
T_A = 25°C, except as specified. Operation in excess of any of these conditions may result in permanent damage to this device.
Continuous operation at these minimum or maximum ratings is not recommended.
Symbol
Parameter
Units
Min.
Max.
V_CC
V_IN,LVTTL
V_{IN,HS_IN}
I_O,LVTTL
T_stg
T_j
Supply Voltage
LVTTL Input Voltage
HS_IN Input Voltage (Differential)
LVTTL Output Sink/Source Current
Storage Temperature
Junction Temperature
V
–0.5
4.0
V
–0.5
V_CC + 0.5^[1]
mV
200
2000
mA
±13
°C
–65
+150
°C
0
+125
Note:
1. Must remain less than or equal to absolute maximum V_CC voltage of 4.0 V.
DC Electrical Specifications
V_CC = 3.15 V to 3.45 V
Symbol
Parameter
V_IH,LVTTL
LVTTL Input High Voltage Range
V_IL,LVTTL
V_OH,LVTTL
LVTTL Input Low Voltage Range
LVTTL Output High Voltage Range, I_OH = –400 µA
V_OL,LVTTL
LVTTL Output Low Voltage Level, I_OL = 1 mA
I_IH,LVTTL
Input High Current (Magnitude), V_IN = 2.4 V, V_CC = 3.45 V
I_IL,LVTTL
I_CC
Input Low Current (Magnitude), V_IN = 0.4 V, V_CC = 3.45 V
Total Supply Current, T_A = 25°C
5
Units
V
V
V
V
µA
µA
mA
Min. Typ.
2.0
2.2
0
150
Max.
0.8
V_CC
0.6
40
–600
185