HCPL-7560 Datasheet, PDF (5/18 Pages) Agilent(Hewlett-Packard) – Optically Isolated Sigma-Delta Modulator

Regulatory Information
The HCPL-7560 has been approved by the following organizations:
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01.
UL
Approval under UL 1577, component recognition program up to V_ISO = 3750 V_RMS. File E55361.
CSA
Approval under CSA Component Acceptance Notice #5, File CA 88324.
IEC/EN/DIN EN 60747-5-2 Insulation Characteristics^[1]
Description
Symbol
HCPL-7560 Unit
Installation classification per DIN VDE 0110/1.89, Table 1
for rated mains voltage ≤ 300 Vrms
I - IV
for rated mains voltage ≤ 450 Vrms
I - III
for rated mains voltage ≤ 600 Vrms
I - II
Climatic Classification
40/85/21
Pollution Degree (DIN VDE 0110/1.89)
2
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b^[2]
V_IORM x 1.875=V_PR, 100% Production Test withtm=1 sec,
Partial discharge < 5 pC
V_IORM
V_PR
891
1670
V_peak
V_peak
Input to Output Test Voltage, Method a*
V_IORM x 1.5=V_PR, Type and Sample Test, tm=60 sec,
Partial discharge < 5 pC
V_PR
1336
V_peak
Highest Allowable Overvoltage
(Transient Overvoltage tini = 10 sec)
V_IOTM
6000
V_peak
Safety-limiting values - maximum values allowed in the event of a failure,
also see Figure 13.
Case Temperature
Input Current^[3]
Output Power^[3]
T_S
175
I_{S, INPUT}
400
P_{S, OUTPUT}
600
°C
mA
mW
Insulation Resistance at T_S, V_IO = 500 V
R_S
>10⁹
Ω
Notes:
1. Insulation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits within the
application. Surface Mount Classifications is Class A in accordance with CECC00802.
2. Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/EN/
DIN EN 60747-5-2) for a detailed description of Method a and Method b partial discharge test profiles.
3. Refer to the following figure for dependence of P_S and I_S on ambient temperature.
5