HBCS-7100 Datasheet, PDF (4/6 Pages) Agilent(Hewlett-Packard) – Industrial Digital Bar Code Slot Reader

Interface Specifications
The slot reader has two different
standard connectors: a 5 pin, 240
metal locking DIN; or a 9 pin
female D-sub squeeze to release.
The recommended interface is
shown in Figure 2. The mechani-
cal specifications for the 5 pin
DIN are shown in Figure 3. The
mechanical specifications for the
9 pin D-sub are shown in
Figure 4.
V_S
V_O
10 kΩ
GND
SHIELD
Figure 2. Recommended Interface.
V_S
10 µF
V_O
GND
Pinout
Function
V_S
Output
Ground
Shield
No Connect
5 pin
DIN
1
2
4
Case
3,5
9 pin
D-sub
9
2
7
8
1,3,4,5,6
4 ³²
51
Figure 3. Connector Configuration for HBCS-71X0.
Shield and ground are tied together in the connector.
Note: If the part is purchased with stripped and tinned wires, or if the connector is removed,
the ground and shield wires must be connected together for proper operation.
Wire Color
Function
V_S
Output
Ground
Shield
Color
Red
Yellow/White
Black
Braid
PIN 9
PIN 5
9 PIN D-SUB FEMALE CONNECTOR
PIN 6
PIN 1
Figure 4. Connector Configuration for HBCS-71X8.
PSRR Performance
10000
1000
96
100
The CE Mark demonstrates
compliance with EC directives on
EMC.
10
1
40 80 100 200 500 800 100 200 500 800 100 200 500 800 1E+ 2E+ 5E+ 8E+ 1E+
0 0 0 0 00 00 00 00 05 05 05 05 06
FREQUENCY – KHz
Figure 5. Ripple Noise Needed to Switch Output.
4-78