HBCS-7100 Datasheet, PDF (1/6 Pages) Agilent(Hewlett-Packard) – Industrial Digital Bar Code Slot Reader

H
Industrial Digital Bar Code Slot
Reader
Technical Data
HBCS-7100 Series
Features
• Multi Resolution
Compatible with virtually all bar
code resolutions
• Large Slot Width
Allows reading thickly
laminated cards
• Sealed Metal Case (IP 66/67)
Can be installed outdoors or in
wet environments
• Tamper Proof Design
Ideal for security applications
• Minimal First Bar Distortion
• 880 nm Light
• Wide Operating Temperature
Range
-40°C to +70°C
• Wide Scan Speed Range
• Black Textured Epoxy Finish
• Digital Output
Open collector output compat-
ible with TTL and CMOS logic
• Single +5 Volt Supply
Description
Hewlett-Packard’s Industrial
Digital Slot Reader is designed to
provide excellent scanning
performance on a wide variety of
bar coded cards and badges. It
contains a unique optical/
electrical system that integrates
over a large vertical area of the
bar/space pattern, providing a
greatly improved first read rate
even on poorly printed bar codes.
The HBCS-7100 Series uses an
infrared (880 nm) light with 0.19
mm (0.0075 in.) resolution.
The extra large depth of field
allows the slot reader to have a
slot width of 3.2 mm (0.125 in.),
thus making it possible to read
even thickly laminated cards and
badges. When used as a stand
alone optics module, the
maximum depth of field is
dependent upon resolution.
The optics and electronics are
housed in a rugged metal case.
The case is fully gasketed and
sealed, making it suitable for use
in outdoor or wet environments.
The black epoxy coating adds a
durable, finished look to the
Digital Slot Reader. When
installed using the rear screw
holes, the units become tamper
proof, making an excellent choice
for security access control.
The optical system is centered in
the slot track, allowing the user to
easily scan from either direction.
The wide slot width makes it easy
to insert and slide the cards. The
optical system is covered with a
recessed window to prevent
contamination and reduce the
wear on the cards.
The standard slot reader comes
with the optics module mounted
on a base plate with an opposite
rail and 122 cm (48 in.) straight
cord. Two standard connectors
are available: a male 5 pin, 240°,
locking DIN (HBCS-7100); or a
female, 9 pin D-sub squeeze to
release, (HBCS-7108).
The optics module (HBCS-7150)
is available which can be
integrated into other equipment
or used as a stand alone sensor
assembly.
Applications
The digital bar code slot reader is
a highly effective alternative to
5965-3007E
4-75