N2100B Datasheet, PDF (3/4 Pages) Agilent(Hewlett-Packard) – Digital Communication Analyzer

Base Measurement (with Y histogram shown)
Specifications
The PXIT Family: N2099A,N2102B,N2101B & N2100B
OMA Measurement
General
Sample rate
160 Ms/s
Number of points per acquisition 1024
Maximum number of acquisitions 1024
Clock recovery
<2.7 Gb/s
Pattern acquisition maximum length 2047 bits
Fixed number of points per bit in 128
pattern acquisition mode
Electrical
Number of channels
1 single ended
BW of electrical input
12 GHz
characteristic
RMS noise*
2.5mV RMS (Max) 1.3mV RMS (characteristic)
Connection type
AC Coupled
AC input voltage range
1 V pp (Max)
Connector type
SMA
Maximum non-destruct I/P
2 V pp
Electrical return loss
–12 dB (Return Loss on electrical path when an
optical signal is applied)
* Measured with no input signal and minimum internal gain setting.
Clock
Clock input frequency range
10 MHz to 11.318 GHz (characteristic)
Clock input voltage range
0.5 to 1 V pp
Note: Unless stated otherwise nominal 50 ohm termination
Optical
Unfiltered optical BW
Available filter combinations (3)
Optical responsivity
Optical connector
Fiber input
Maximum non-destruct average
Maximum non-destruct peak
Average power monitor
Calibrated wavelengths
7.5 GHz (characteristic)
Unfiltered option only available if selected
Choose 4 filters from the table on page 4
750-1650 nm
FC/PC
62/125 μm
–3 dBm at 1310 nm
+7 dBm at 1310 nm
–30 dBm to –2 dBm at 850 nm
850 nm, 1310 nm, 1550 nm
3