N2640A Datasheet, PDF (2/8 Pages) Agilent(Hewlett-Packard) – Technical Data, Software Release 3.0

Feature
Autotest Measurement Time
Frequency Range
Supported TIA Categories
Supported ISO Classes
Measurement Accuracy
Alien Crosstalk Measurement
Talkset , full-duplex
Fiber Measurement on two
wavelengths
Removable Memory
Rechargeable Battery
Dimensions (H x W x D)
Weight (excluding adapters)
General Specifications
WireScope 350
25 sec (1 – 350 MHz)
1 MHz – 350 MHz
3/5/5e/6
C, D, E
exceeds TIA Level III
not available
via copper cables
single wavelength
probes, require fiber
swapping
128 MByte CF card
Ni-MH, 5-8 hours of
typical use
228 x 114 x 66 mm
(8.9” x 4.5” x 2.6”)
approx. 1.2 kg (2.6 lbs)
WireScope Pro
9 sec (1 MHz – 1 GHz)
1 MHz – 1 GHz
3/5/5e/6/6A
C, D, E, E , F
A
ISO Level IV
optional
via copper and fiber
cables
dual-wavelength
probes, no fiber
swapping
256 MByte USB drive
Li-Ion, 8 hours of
typical use
232 x 126 x 86.7 mm
(9.1” x 5” x 3.4”)
approx. 1.36 kg (3 lbs)
Ease of Use
Based on the proven WireScope 350
user interface, the WireScope Pro is
extremely easy to operate and to learn.
The Autotest function makes it a single
touch of a button to perform a
complete cable characterization.
The support for USB Flash Drives not
only expands the storage capacity, but
also makes it easy to transfer test data,
user profiles and test settings, and to
install software upgrades.
Future Proof Architecture
WireScope LAN cabling testers are
known to be future proof. WireScope
Pro provides investment protection as
it grows with the users’ needs, offering
a lower cost Category 6 product and
supporting software upgrades later as
needed.
Test Parameters
Connectivity
Environmental Conditions
• Supported frequency range: 1 MHz
to 1 GHz
• Complies with ISO/IEC 61935-
1/Ed. 2 Level IV Accuracy
• SmartProbe Interface Connector
• Universal Serial Bus (USB 1.1) port
• Talkset interface: 3.5 mm stereo
jack
Power Supply
• Removable/Rechargeable Li-Ion
batteries provide 5 to 8 hours of
continuous operation.
• Auxiliary 10/100BASE-T RJ45
interface for remote control and
display export.
Software Upgrade
• AC Power adapter: 100~240 V AC,
12 V/3.3 A DC, plugs directly into
the battery which can be recharged
separate from the instrument.
Semi-automated software upgrade
using USB Flash Drive or special USB
cable (included).
Memory
User Interface
• 64 MByte internal flash memory,
15.6 MByte user accessible.
Allows to store 4,800 measurement
summaries, or 160 records with all
graphical details.
• 256 MByte USB Flash Drive
included. Allows to store 69,300
measurement summaries, or 2,345
records with all graphical details.
56 mm x 150 mm (2.2” x 5.9”)
touch-sensitive color LCD display
Dimensions
Size: 232 mm x 126 mm x 86.7 mm
(9.13” x 4.96” x 3.41”)
Weight: approx. 1.36 kg
(approx. 3.0 lbs.)
Operating Temperature
0°C to +40°C
Storage Temperature
–10°C to +55°C
Relative Humidity
10% to 80%
Operating Altitude
up to 3000 meters
Pollution Degree: 2
ETL Certificate Number
3103597CRT-001-002 (Cat 6A)
3103597CRT-001-003 (Class F)
Page 2 of 8